• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. M

    Genie S-60X Platform Control Issues

    2012 Genie S-60X Serial #: S60X12-024105 Everything functions from the ground but will not extend the boom or lower it from the basket. We have changed the joy stick and recalibrated it with no success Any ideas where to proceed from here.
  2. M

    Genie Boom Lift Platform Control Issue

    2012 Genie S- 60X 4x4 Serial: S60X12-024105 I have replaced the basket control joystick and have recalibrated it numerous times. The boom will go up but not down. The boom will extent, but not retract. All functions work from the ground. I reversed the wires on the solenoid. Then the boom...
  3. M

    Allison 3000 Issues

    2011 Navistar 7500 VIN: 1HTWNAZTSCJ549743 Maxx Force 10 When driving this truck it would lock up into forward gear, the driver believed it to be 4th gear. It would not up ship or down shift or go into reverse. It has an active pressure 1 (PS1) code. Dropped the valve body, the fluids and...
  4. M

    A25D Jumping out of gear

    2005 Volvo A25D Vin#A25DV13985 Jumping out of gear. The fluids look good. I cleaned all of the connections to the transmission. These codes remain 2 Solenoid valve S2, 3 solenoid valve S3, 4 solenoid valve S4, 5 Solenoid valve S5, 7 Solenoid valve S14, 8 Solenoid Valve S7, 11 retarder control...
  5. M

    SER Problem

    2018 Komatsu WA270 Front end loader A28239 We are getting an L04 code. I have changed the DEF fluid and disconnected the battery. The same code returned and the machine is now d rating. Any ideas of what direction to go in will be greatly appreciated.
  6. M

    HAMM Roller Will Not Start

    HAMM Roller Model: H12I Year: 2018 Serial:WGH0H235LHAA00747 The machine will not crank. The brake light in the dash flashing with the warning light signal.
  7. M

    New Holland L218

    We have a New Holland L218 Serial Number: NEM485278 ECU: Denso 185186180 275700-3051 12V Does any one know of a machine being parted out? Or someone who can repair and reprogram our ECU? Thanks for your help.
  8. M

    Injector Issues

    New Holland L218 Serial # NEM485278 Shibaura Motor- N4LD1-TA-LB Looking for a set of 4 injectors reasonably priced for this loader. Part # SBA 131406570 R. Thanks for any help.
  9. M

    Steering Issue

    ASV RC - 100 Posi Track PIN: RSD00158 The right side track will move, but very weak forward and reverse. It is not the drive motor. Customer had it replaced prior to coming to my shop. Any ideas on how to proceed. Thanks.
  10. M

    A35E -Steering

    Volvo A35E VCE0A35EC0001230 When driving at or close to top speed, the primary driving system light will flash occasionally Or stay on until you turn the steering wheel then it will go out immediately. What is the procedure for checking this out? Thanks
  11. M

    A35E. Transferbox

    Can anyone tell me the proper procedure for adjusting the shift fork? The rod turns in and out and has a jam nut on it in the center of the piston area. Volvo A35E VCE0A35ECooo10230
  12. M

    Volvo A35E - Parts

    Is there a good aftermarket source for transfer gearbox parts? 22568
  13. M

    L 218 New Holland Skid Steer Loader

    L 218 New Holland Skid Steer Loader Serial # NEM485278 Was wondering if anyone knew how much fuel pressure needs to be present on the common rail to start and run it full throttle? It will start with a small shot of ether. Will not run full throttle, then dies down. My scanner keeps losing...
  14. M

    JLG G-10-55-A

    Serial # 0160063016 Model # G10-55-A Turb Stopped going forward and reverse. Dash Displays - Canbus Fault Signal Invalid I noticed that the rpm and hours will go out and then periodically come back on. The oil gauge fluctuates. The temperature gauge never moves off cold. And the red light...
  15. M

    416 Hoe Controls

    CAT 416 Backhoe Serial # 4ZN19365 I need to change the controls around on the hoe. I have changed the linkages on JD before and was wondering if it could be done the same way? If so, does anyone know of where I could purchase a kit? The linkages are currently all straight. If this is not the...
  16. M

    CAT 416 Backhoe Transmission Issue

    CAT 416 Backhoe Serial #5PC03188 9R0001 Transmission #L6 778 937920 The Backhoe was being driven the operator said it just stopped moving. He checked all the linkages and saw his hydraulic fluid was low and his transmission was over full. Not being familiar with these machines I am assuming...
  17. M

    Genie S-60X 4x4

    2012 Genie S-60x 4x4 Serial - S60x12-024105 All functions work from the ground. You can drive it from the basket and turn the wheels, you can raise the boom but not lower it from the basket. It will extent out a little ways and stop. The left joy stick was replaced due to a torn boot and water...
  18. M

    Volvo A25D- Code Issue

    Volvo A25D Serial # - A25DV13985 This machine has a SE 2202-3 Code. It appears to be a temp sender oil voltage high. I did not find any wiring issues, so I dropped the pan and replaced the sender. Test ran, rescanned and cleared the codes thru my diesel laptop. There shows to be no faults codes...
  19. M

    CAT D6K2 XL Dozer Solenoid Location

    CAT D6K2 XL Dozer Serial # WMR00661 Can someone tell me where the pump forward control solenoid is located. A diagram would be helpful and much appreciated. Thanks.
  20. M

    Austin western super 301

    Does anyone know where I could get a turntable. The one we have has a 3 foot piece missing. I have not been able to locate a salvage machine.
Top