• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. P

    D20P....wet or dry clutch?

    Yea you probably figured out you have a seal out between the clutch housing and the differential. The best tool to use to remove the clutches is the ratchet wrench that has the pivoting head. I believe it was a 13mm. Worked great.
  2. P

    Section for komatsu d20,21 and similar grey market dozers

    Jeff, If you want you can give me a call and I can tell you what you need to do. I just went thru it and with the help of this site and some other folks like Kent Baugh I got thru it a lot easier than what it would have taken just following the manual. Paul 832-221-7358.
  3. P

    Section for komatsu d20,21 and similar grey market dozers

    The brake is locked up on that side. In the back of the machine below the batterys you should see covers left and right with 2 bolts in them. Take the cover off and back the 17mm bolt out a few turns and maybe give the end of the socket extension a couple of whacks to see if you can break it...
  4. P

    Section for komatsu d20,21 and similar grey market dozers

    Good evening. In the process of replacing clutches on a 20P-6. I am trying to determine if I need to adjust the position of the stud that comes out of the top of yoke that the booster cylinder piston presses against to release the clutches. I have read that it needs to be 121mm from the center...
  5. P

    Section for komatsu d20,21 and similar grey market dozers

    I think I know there is only one strainer. When you pull it out do you lose all the oil? Should you drain it first?
  6. P

    Section for komatsu d20,21 and similar grey market dozers

    James I use my down in S texas and can push over most trees up to about 4 inches. If its bigger you can push it over then work around the base. Most of my brush is mesquite and weesatche both have deep tap roots and I can still get them out of the ground.
  7. P

    Section for komatsu d20,21 and similar grey market dozers

    Ok I am new to the forum. Got my D20P-6 last summer and went through it pretty good. Love it and it is fun to run. Read all 117pages and learned a lot to look for as I went through it. Learned about the clutches locking up so I try to move it every time I go to the ranch. I figured out if after...
Top