• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. C

    Case 1840 Bottom Access?

    I rebuilt a 1998 1840 and replaced all hoses among everything else. if one hose is leaking, the others are not far behind because they all rub against each other. see pics ..
  2. C

    1845c chain drive issues

    I did not have the rotating tool. I used a socket and ratchet on flywheel bolts. Had engine out at the time. See pic for location of lock pin.
  3. C

    1845c chain drive issues

  4. C

    Case 1840 Steering issue

  5. C

    Battery Compartment on a Case 1840 skid steer

    Remove two nuts if still on, then lift from back and slide out and up towards back.
  6. C

    Case 1845C Brake Pin Won't Engage

    I recently completed an O/H of a mid 90's 1840 which I believe uses same concept of brake pins. Had a similar problem on left side and found the internal bracket broken off and distorted. Had to remove tube and bracket, straightened things out same as other side and re-welded. see pics...
  7. C

    1845c Quick Tach.

    Good luck with that job. I recently overhauled my 93 1840 and had a similar problem. Pins would not budge, even with a considerable amount of heat. Solution was to use narrow cut off blade on angle grinder and cut off pin between frame and cylinder. Make sure you protect the cylinder rod to...
  8. C

    Case 1845C

  9. C

    Case 1845C

  10. C

    Case 1840

    This unit was bought for personal use. I spent the winter disassembling, sand blasting, priming and painting. Replaced all axle bearings and seals, new hoses, all new wiring, new tires, fabricated new metal covers to replace those fiberglass POS chain covers. I was lucky, hydraulic system /...
  11. C

    Case 1840

  12. C

    Case 1840

    Just finished a complete restoration on this 1993 1840. Complete strip down, sand blast, prime and repaint. It was not draining. The belly was full of oily hard clay.
  13. C

    Case 1840

    You have four inspection holes with covers bolted underneath.
  14. C

    Case 1840 Hydraulic Temp switch location

    Still can't find this temp switch. All I see is the two reverse switches.
  15. C

    Case 1840 Hydraulic Temp switch location

    I can't find the Hydraulic Temp switch. I've had this thing apart for the rebuild but just can't seem to locate where this temp switch can be. Due to the state of the wiring, I am rewiring this thing from scratch. Don't know why this picture comes out sideways either !
  16. C

    Case 1840 - Started, Died, Now Wont Start

  17. C

    1845c drive motor

    Depends which motor you have ... SUNSTRAND or DANFOSS
  18. C

    1845c drive motor

  19. C

    Oil pressure sending unit location on an 1840 Case

    Right hand side, under the fuel injection pump.
  20. C

    case 1840 loader problems after blowing a hose

    I came to the same conclusion. I am fortunate to have a hydraulic shop within a 10 minute drive. It cost me less than $200 to replace all the auxiliary sytem hoses. Compared to the cost of replacing all the rest of the hoses which I already did, I decided to keep the system just in case. I...
Top