• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. R

    please help! Takeuchi TB125 lever-lock issue

    On my Tb016, this problem was happening often.What i did was ajusting the 2 switchs on the lever lock. Since I adjusted those switchs , there is no more problems.
  2. R

    Adding more track rollers...

    Did some one on this Forum ever had the idea of adding more track rollers on a Mini Ex ? Could more rollers help for longer life of the rubber tracks and help in "floating easier on grass garden". With my TB016, the tread footprint that it makes, it looks like this Mini Ex is twice it's...
  3. R

    Takeuchi TB 016 2003 info...

    Thank you Toddgarage for your advice! I cleaned the two safety switches, and adjusted them properly, cleaned their wiring terminals and connections. After that repair, I worked with the machine, and every thing went perfectly! Have a good summer!
  4. R

    Tb016 can someone please tell me what year it is

    My Takeuchi TB 016 is dated 2003 and the serial number is 11605458
  5. R

    Takeuchi TB 016 2003 info...

    uffex, have the CD for the parts manual, and the shop manual (cd) and I can see the illustration, but what could be an easy way to get to that solenoid with out taking off many parts of the excavator. Ronald...near the Gaspe coast.
  6. R

    Takeuchi TB 016 2003 info...

    uffex...may be I dont know how.... I was not able to open what you send me...
  7. R

    Takeuchi TB 016 2003 info...

    Can someone familiar with Taheuchi TB016 help me , give me advice, how to get to the safety lock solenoid the easy way. I would like to check the wiring that goes to those solenoid. Thank you for your help ! Ronald .
  8. R

    please help! Takeuchi TB125 lever-lock issue

    Can you just get 12 Volts with a jumper wire to the selenoid ? I have the same problem on my TB016 2003....
  9. R

    Takeuchi TB016 lost L.H. side controls

    ARI, did you find out what was you problem? May be could help some on else....
  10. R

    Thumb on a mini Exavator?

    Tinkerer, usually, what is the average result ... in degrees?
  11. R

    Thumb on a mini Exavator?

    How many degrees of rotation do you normally get from wide open to full close on a thumb without linkage, and installed on the main bucket pin? Thank you for your reply! Ronald!
  12. R

    Installing a thumb on a Takeuchi TB016

    Mark, I am doing test on my machine, if the results are good, I will post them.... installing a relief valve on the thumb pressure line, with a check valve with a cracking pressure of 5 psi on the thumb cylinder return side (to prevent vacuum. From the relief valve installed and attatched on the...
  13. R

    Installing a thumb on a Takeuchi TB016

    Mark, the relief valve will have the cylinder receive the pressure that the said relief valve is set to . But this valve will not release if the pressure will come from the cylinder, if the cylinder is squeeze from the bucket cylinder. There is such a valve (overload valve) on the boom cylinder...
  14. R

    Installing a thumb on a Takeuchi TB016

    Mark, thanks for your reply, I understand that there is one relief valve at each end of the spool (auxilliary line). But me i need to know if instead of the relief valve, I can take the relief valve off and install an overload valve at where the relief valve was installed at the factory. This...
  15. R

    Installing a thumb on a Takeuchi TB016

    Can someone tell me the part number for the overload valve needed on the auxillary circuit when installing a thumb on my Takeuchi TB016 serial 11605456? would that OEM part from Takeuchi be a bolt on part that fits directly on the control valve? Thank you for your help, Takeuchi are not very...
  16. R

    RENAULT 630RZ ELECTRICAL PROBLEMS

    Can someone help me find a shop manual for the electrical diagram of this Renault 630RZ farm tractor. This tractor is not very popular in Quebec, Canada were we live. Any help will be welcome,Thank you for your reply.
  17. R

    Track Ground Pressure "kPa"

    If the rubber track would be support by more rollers on the ground, the track could have better chance to last longer...
  18. R

    Track Ground Pressure "kPa"

    When we talk about track ground pressure, we need to take in account that on small excavator with rubber tracks , when there is only 3 smalls carrier rollers , plus the big front idler and the sprocket ,that supports the total weight of the machine. the load is not equally spread on all the...
  19. R

    Overload valve for a Takeuchi Tb o16

    Heymccall, I shall take the floor cover off and lock to see if it is like your photo! If it's the same, so the pressure on the auxillary circuit...(p1,p2) can be adjusted to be less than the pressure that the "bucket cylinder" is receiving from the main circuit. Item "15" is the adjusting screw...
  20. R

    Overload valve for a Takeuchi Tb o16

    Can some one familiar with Takeuchi products help me find the part number for an "overload valve" that could be installed direct to the control body valve of a TB o16 serial 11605458 2003. This safety overload valve would serve as a relief installed on the thum cylinder when the cylinder that...
Top