• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. laycobeau

    Liebherr 622 Joystick Repair needed

    This is Beau. I have retired for the most part. but email me direct at laycobeau@gmail.com and I will see if I can contact any one who want's to give it a try. Best if you could find one to try to be sure that is the problem
  2. laycobeau

    1977 Lull 400B Contolls

    try these
  3. laycobeau

    Just bought a 300 Ton Liebherr need support near Topeka!

    Try Berry Tractor 1750 SW 41st Street Topeka, KS 66609 Phone: (785) 266-9509 If they can't they will know who can
  4. laycobeau

    Case 580K Neutral start switch

    Clean that mess up and I bet a lot of stuff will start working. Good luck
  5. laycobeau

    Case 580K Neutral start switch

    The white and red wire that you say works goes through the neutral switch that you say works to the black and yellow wire on the switch the black and yellow wire should go to ground/chassis/battery- it does not go through anything else.
  6. laycobeau

    Case 580K Neutral start switch

    Check your black/yellow wire on neutral start switch It chassis grounds at mounting bolt for chassis magnetic switch. Clean and check 0 ohms to battery -
  7. laycobeau

    case 9010 B computer not powering up

    What are you using for a ground to measure your voltage. connector or the frame? They may be using a ground to enable.
  8. laycobeau

    case 9010 B computer not powering up

    Are you sure about power and ground into the monitor? I think some of those may have a fuse inside. Sounds like broken(loose) wire or blown fuse. Of course I've been wrong about half the time this year.
  9. laycobeau

    Sk200 gage cluster IC blown

    If any one has one that they can read the number on it I can tell you what it is and where to get it beware it may be programmable if it is you are out of luck, Also looks like u10 is damaged also. It is a 74hc14 logic chip in soic-14 package
  10. laycobeau

    John Deere 310D Backhoe want go in forward or reverse

    Only 50 bucks or so for the switch. Is the park brake on or the light on?? clean all your fuses and see what happens.
  11. laycobeau

    D8T No Reverse

    585-2 and 673-2 speed sensor #1 erratic output. 1405-5 solenoid #5 low current Best I can tell. anyone know for sure? one
  12. laycobeau

    Case 580K won’t move

    Looks like an Otto P3- series here in link to measure to see they are 5 t0 10 amps https://www.otto-controls.com/-/media/products/literature/P3-Product-Bulletin.ashx
  13. laycobeau

    580E Power Shuttle Leak

    Looks like an Otto P3- switch you can go to their web site to measure https://www.otto-controls.com/-/media/products/literature/P3-Product-Bulletin.ashx Good luck they are $12.00 to $36.00
  14. laycobeau

    Hetronic wireless remote

    Net for Hetronic haven't worked with them in a long time but you might try http://www.hetronic.com/contact-us
  15. laycobeau

    CAT 420F HAND THROTTLE SWITCH NOT WORKING - Need Wiring Schematic

    Cat says anytime you hit the brake you have to turn the dial back to 0 then back up to work ????
  16. laycobeau

    544D doesn't shift in to second gear in either range?

    are you saying you have first and third gear lo and hi?
  17. laycobeau

    590 sl 2 park brake kills trans controller

    Why do you want the TCU to work with the parking break on?
  18. laycobeau

    Someone please help me before I scrap this P.O.S.!!

    This guy has exchange shifters/controllers for the old Fiat Allis Crane And Tractor <craneandtractor@yahoo.com>
Top