• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. 2

    Converting over 3 point implements to run off a skid steer??

    Hey just wondering what size of hydrauic motor you used for your blower. I know this is an old thread but I'm building one here for my 72 inch blower and I've been looking around on what size of motor to use. Thanks
  2. 2

    D5N OR D6N transmission pump

    OK thanks for the reply. Yah I'm guessing I don't have access to it or I would have found it lol. Yah it's got new gears bearings etc. It looks like a quality rebuild imo. I think these came from a local cat dealer as sitting on the shelf and not moving. But yah I wasn't sure what it would be...
  3. 2

    D5N OR D6N transmission pump

    OK thanks. Yah I haven't been able to find it online is all. We're did you find it as I'm kinda looking for a price on it to put it up for sale as I don't own a D6N lol. Wish I did but I don't.
  4. 2

    D5N OR D6N transmission pump

    Ok so long story short I bought a bunch of stuff at a local auction in some crates and there was a couple final drives and pump in there. The final drives I found out were from a cat 279c skid steer and this pump had this D5N or D6N Trans pump written on it. Now I have tried to search the net...
  5. 2

    Ditch witch trenchers

    Just figured I'd put this out there. I know there is a service manual thread for other equipment and after countless hours of searching I figured I'd post it on here. Does any one have any manuals in PDF for for these machines. I figured I'd ask here as I have scoured the Internet with no luck...
  6. 2

    Pics of your mini!

    2002 kobelco sk35sr2 Here's a picture of mine. Hoping to get a 8 ton in the next few years. Thinking a Kubota or a deere Here's a picture of mine. Hoping to get a 8 ton in the next few years. Thinking a Kubota or a deere but hhaven't got enough work yet. Might upgrade the truck and trailer...
  7. 2

    Ditch Witch 5110 tranny problem

    Well had some time this weekend to look mine over. Wasnt the clevis pin. Or the linkage. Poped the safety covers off and firat thing I noticed was the 4 bolts that hold the hydralic rear pump on were loose. So removed the top bolts and reinstalled them and did the same with bottom ones. Once I...
  8. 2

    Bronze bushings vs idler bearings.

    Why didn't you just rebuild them. I had to rebuild them all on my kobelco as I couldn't afford to buy new bottom rollers. At almost 400 bucks each all of mine needed new bearings and seals. Needless to say it only cost me about 250 to rebuild all 8 bottom rollers and 2 top rollers and also the 2...
  9. 2

    Ditch Witch 5110 tranny problem

    OK thanks I'll have to have a look at mine. I think my two levers are fairly sloppy. I'll have a look though. You don't happen to have any manuals for yours do you.
  10. 2

    Ditch Witch 5110 tranny problem

    did you figure out what happened to this by chance. I have a 6510 and I can only use the creep drive as the main tranny will not go into transport mode unless I'm doing something wrong. And yes I know this is a older thread.
  11. 2

    Mini buckets

    I'll get some.pics of it this weekend once I'm home. I'm off work and in school for 2 months here but go home on weekends. Ya I'm surprised he has any left to be honest. When no was there he had about 50 left. But I'll take some pics. Even with Jd 27 zits you could probably make a 40 or 42 inch...
  12. 2

    Mini buckets

    Ya but he had 24 inch 18 inch 16 inch and a few others too. I think he told me there was like 200 or even 300 total lol.
  13. 2

    Mini buckets

    I built my 45 inch ditching bucket. I was gonna go 36 inch the figured go big and cut it down if it was to big. But I could have went bit bigger if I wanted. Even wet heavy clay I can't tip extended right out. But my bucket is lighted built but I haven't wrecked it yet. The back is 10 gauge...
  14. 2

    Mini buckets

    Here ya go. He sold them to me for 200 but I bought 3 and a manual thumb and something else. http://www.kijiji.ca/v-heavy-equipment-parts-accessories/calgary/18-digging-buckets-for-mini-midi-excavator-brand-new/1013215463?enableSearchNavigationFlag=true
  15. 2

    Mini buckets

    Ill find the add. Its on kijiji in calgary alberta canada. He still had some in janruary so im guessing he has some left
  16. 2

    Mini buckets

    Is it a wedge style one. I bought a couple buckets last year for 200 each brand new. They were werx brue brand. Theyhave x156 teethon them. Moddified mine to fit my wain roy qa. But the guy had 200 of these buckets. They were a bank repo he said.
  17. 2

    New Holland Midis

    I got one. Mine is a kobelco. Works great. No real issues besides maintenance. Ive been looking at a new 2013 new holland 35eh I belive cab heat air blah blah blah. Just need more work for my current 2002 kobelco to justify the new one.
  18. 2

    Need more lights.

    I got 3 of them on my sk35sr kobelco. Awsome light. Now I just need a cab and heater lol. Maybe that will be my winter project.
  19. 2

    Expected Track Life & New Tracks

    Good info. I know I searched when I bought new tracks. But trying to be reasonable was my thing. My mini might see a few hundred hrs a year cleaning, installing culverts and ditches. I also do some smaller jobs on foundations and utility. For me it was bottom dollar as im new to this industry of...
  20. 2

    Type of oil for final drive

    On your page it says esso spartan ep220 too, is it also good oil. I have a kobelco sk35sr 2
Top