• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. tomo

    Takeuchi Top Curved acrylic window

    I have a Takeuchi TB153FR. Do too ability to have bad luck my top curved window in cracked. I temporarily fixed it with 200mph tape. Has anyone found a aftermarket source for this window the dealer is over $600. This is the oem part number 0358605300. Thanks in advance.
  2. tomo

    Cracked boom Takeuchi TB153

    Thanks for the info Dave. I will definitely make sure these procedures are used for the repair.
  3. tomo

    Takeuchi TB153FR AC Ports

    You have to raise the cab to access them.
  4. tomo

    Cracked boom Takeuchi TB153

    I've got the same machine with the same exact problem. Can you post some pics of your repair.
  5. tomo

    No Prime

    Can you post a picture of it?
  6. tomo

    No Prime

    If you are talking about the one that goes to the lp vaporizer- Should be the oil pressure switch. Some guys connect them to the key switch so it is hot when the key is turned on. You can crack the line after the solenoid and see if you are get fuel Thu it. Don't be near it when your...
  7. tomo

    Hyster H50XM transmission slippage

    J20c is the correct oil. Clutch packs might be worn out if you notice it in one direction. The old oil would of had more grip to it from the broken down clutch materials in it. I would test the pressures. Hope this helps.
  8. tomo

    Cat 420D steer cylinder repair

    Thanks for the replies.
  9. tomo

    Making your own ripper

    I have a same machine I was going to build one for mine out of a ripper Shank from a field cultivator and one day I was at the local junk yard and actually found one that looks like its for a backhoe. I adapted it to fit my coupler and it works great. You might check around if you have any...
  10. tomo

    Cat 420D steer cylinder repair

    Does anyone have any idea what it would cost to have the dealer rebuild the steer cylinder on a cat 420D that has a ZF front axle where the cylinder is built into it . It needs to come out because it's leaking out of the housing. Just looking for a ballpark figure I've been told these can be a...
  11. tomo

    Case TR320 Aux problem

    I'm working on a Case TR320 with mechanical hydraulic and proportional aux. The aux circuit quits intermittently . I tested all the wiring through the joysticks to the main harness and all the wires have good continuity. I tested the voltage thru the switch and had proper power, ground ,and...
  12. tomo

    new to me takeuchi tb135--need advice on bucket sizes

    I had a high capacity 24 inch tag on mine with big flare teeth to help with back filling and it handled it just fine. I wouldn't swing real fast over the tracks if your boom is extended very far. That was my main bucket that I used , also used a12 high capacity alot too.
  13. tomo

    Takeuchi TB153FR mowing

    I'm looking at an 08 TB153 FR and was wanting to put some kind of mower on it. I was looking at a 40 inch mulcher. Has anyone tried a rotary type like you pull behind your tractor, I've seen a few of those on the net. I'm mainly going to mow under brush, ditches, ponds.......Thanks for your input.
Top