• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. johntims

    Hitachi EX135UR-5 won't throttle up

    Spica const. I got it figured today and judging by what you have said I’m pretty confident we are having the same problem. Mine was a bad arm roll in pressure sensor. It is located in the pilot manifold just behind and below the cab. Being that yours is a zero tail swing it may be in a slightly...
  2. johntims

    Hitachi EX135UR-5 won't throttle up

    Thanks for the info grandpscott, I have seen the banjo fitting problem many times... this one is deffinatly an electrical problem. The machine controller does not seem to be putting out 5v. I bought a new controller but still nothing.
  3. johntims

    Hitachi EX135UR-5 won't throttle up

    Did you ever figure this out? I am having the same issue with an ex150-5. Thanks
  4. johntims

    D6T spindles cracked

  5. johntims

    D6T spindles cracked

    wfh00377 10000 hrs 2464733 is the part number. I believe the machine is a 2005, The part come up on part store as unavailable and my psr from cat as well as a parts person both confirmed that that number is discontinued with no replacement
  6. johntims

    D6T spindles cracked

    Anyone ever seen the final drive spindles crack? I have a dozer in my shop both sides are cracked in the same place. The local cat dealer has not seen this failure before and yet the part has been discontinued by cat with no replacement. Seems a little suspect to me that there is no replacement...
  7. johntims

    Service Manual Trading Post

    pm sent
  8. johntims

    Service Manual Trading Post

    Looking for a JD TM1604 544H test manual if anyone has... I have a large collection of pdf cat and hitachi manuals for trade
  9. johntims

    544H dash select button

    I am having troubles with a 544H loader, kind of a long story that I will try and keep brief. The transmission is intermittently loosing 3rd and 4th gear. there is a code being posted but we cant get the select button on the dash to work so we can look up the code. We ordered a used dash and...
  10. johntims

    Tool box safety talk

    No they are not required to call me down to discuss just required to look at the job and document any hazards they can think of. It would be very difficult to cover all possible hazards in a meeting monthly. I see your point unfortunately the way the world is going this is becoming the norm, at...
  11. johntims

    Tool box safety talk

    I have worked with some guys that doing that job could very well result in an injury... I guess we would look pretty foolish if a guy did get hurt and the only reason was we thought the job was to minor to do a hazard assessment. Trust me I agree some jobs maybe shouldn't require one, but if you...
  12. johntims

    Tool box safety talk

    haha could fall in...
  13. johntims

    Tool box safety talk

    We are a service company so every new work order we open requires a hazard assessment. Its just a way we can try and make our guys think about potential hazards before they happen. They are very common for mechanics in our neck of the woods, most of our customers even require us to have them to...
  14. johntims

    Volvo EC290B Hydraulics

    Great advice thanks guys!!! does anyone know if I can monitor pump pressures from the cab monitor?
  15. johntims

    Tool box safety talk

    Funny you say that... I have found that the older boys are harder to get safety across to. If I had a dollar for every time I had been told "I have been doing it this way for 20 years" I would be a rich man. Just because you have always done it that way doesn't mean its the safe way to do it. I...
  16. johntims

    Volvo EC290B Hydraulics

    I am looking for the relief pressure specs for a Volvo EC290B excavator. I need to do a hydraulic tune up on it but I don't have a service manual. Does anyone know the specs of have a manual?
  17. johntims

    pioneer Insolated Coveralls

    Anyone use the Pioneer winter gear? we are looking at buying some for our field staff, haven't been able to track down a sample yet.
  18. johntims

    Pin Drivers

    I agree that this is the easiest option but my problem is that most of my field guys are on their own so I need something that can use without a second set of hands.
  19. johntims

    Pin Drivers

    Thanks guys all great ideas, Those of you using the slide sledge what size are you using? I noticed that they make a few different ones. I would be tempted to get the 21lb one... Go big or go home right????
  20. johntims

    Pin Drivers

    I am looking to build/purchase some pin drivers for my shop. Any one have any suggestions? I have used a few different styles but none that worked really great. I would like to come up with something that could be used by one person for field use. Most of the ones I have used are just a large...
Top