• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. C

    D5M tramsmission pump problem

    Working on D5M 5ES2XX serial number, about a year ago it stopped moving went and checked had no pressure so pulled pump and shaft was broke. Checked screens in transmission and torque converter housing both were clean, thought it might have been starving for oil. Put new pump on and about 100...
  2. C

    C( injector trim file question

    I meant C9 in title but don't know how to fix it. Customer took cores back to dealer and they kept boxes and customer just brought back injectors. Dealer said to us SIS for trim file ( I know they stopped sending disk but have still been getting with some injectors). I tried but SIS says 12...
  3. C

    Caterpillar C6.6 injection pump timing

    Yea we bought the tool and I put it on the old pump then pulled the speed sensor and saw where the wide tooth was. Then pinned engine and pulled speed sensor and could see half of wide tooth in top of hole. Thought maybe I messed up timing but pulled lock bolt and you could see where it was...
  4. C

    Caterpillar C6.6 injection pump timing

    Is it possible to pin engine on number 6 cylinder? Pulled front cover and pinned gear then pulled plug and pinned crankshaft, changed pump per book. Now it will start but get a code 261-11, it is a cat reman pump. s/n 666023XX
  5. C

    JOHN DEERE 200D LC - Need help to track this solenoid valve

    AT322678 solenoid and spool???????????? complete valve AT322524??????????????
  6. C

    Cat 938g 6y SER# No Reverse !!

    Is it a series I or II, don't see a 6y serial number, the one you changed was in the middle of the 3 valves?
  7. C

    JLG E-400A no boom controls

    JLG.com, look manuals tab.
  8. C

    cat 955 H wont move and hydraulic dont work

    Does it have a coupling between engine and torque converter?
  9. C

    What kind of OBD code reader

    My pickups and a jeep, we have computers for equipment.
  10. C

    What kind of OBD code reader

    Have been looking OBD code reader but there are so many I don't know which one to get. Less than $300 but more would be ok.
  11. C

    Komatsu

    Scribd has for serial number 80001 and up you can download.
  12. C

    Another Cat resolver issue

    You did the priority valve resolver in loader valve?
  13. C

    D6R track tensioner

    Spring is trapped, remove 4 bolts that hold 2 lock tabs on.
  14. C

    2012 Cat 246c RH joystick controls inoperable

    You could switch controls and see if it switches sides. The 6 pin plug is wired the same on both.
  15. C

    JD 410D dash switches & tach not working

    That wire goes to prong 86 of alt relay (the 6 volt relay) and tach, you can see if the same voltage is there.
  16. C

    JD 410D dash switches & tach not working

    7 volts AC
  17. C

    JD 410D dash switches & tach not working

    The slip on wire is signal for alt light and tach.
  18. C

    JD 410D dash switches & tach not working

    The P13. Did you check the M39 purple wire?
  19. C

    JD 410D dash switches & tach not working

    The wire has 12 to 14 volts now?
  20. C

    JD 410D dash switches & tach not working

    The diode may have kept the ground from coming back to the fuse.
Top