• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. K

    Genie TMZ 34/19 Error Code "0000"

    Wow... what a great help. The test would indicate the diode is indeed open. Any suggestions what might have caused this to happen? I have little issue in aquiring a new diode, but if there is an issue, I would like to look into that first.
  2. K

    Genie TMZ 34/19 Error Code "0000"

    Checked 20,22,23,&37. Ironically, with wire 22 disconnected from the top terminal of the top left relay, the lift rotates and operates fine. I am not sure to what you are refering as the DC Motor Controller. Any ideas why it is working fine without the wire connected and what I should look for?
  3. K

    Genie TMZ 34/19 Error Code "0000"

    Recently did the upgrade on the controls for the 34/19 and once I found the switches in the controllers don't seat perfectly sometimes, I had the lift working fine. On about the 3rd job, everything still worked fine except the turntable. Switch for the turn table activates the valve, but not...
  4. K

    Genie TMZ 34/19 Error Code "0000"

    Thanks for the information. As is usual with Me, the most simplistic was the last to check. I did check the cable at all points, then for the first time removed the cover for the upper control to find the jib control switch was in two pieces. Apparently it was not seated when the retainer...
  5. K

    Genie TMZ 34/19 Error Code "0000"

    Did not manage to speak to anyone this week. Nothing happens when I try the jib , pump never starts. Everything else works fine.
  6. K

    Genie TMZ 34/19 Error Code "0000"

    yes, ground control works the jib and all other functions work from the upper controls.
  7. K

    Genie TMZ 34/19 Error Code "0000"

    VoodooMojo, I can't thank you enough for the information about the replacement controller. I have asked my local guys about something like this almost twice a year (each time I had controller problems) for the past 3-4 years and been told nothing like this existed. I ordered one and spent the...
  8. K

    Genie TMZ 34/19 Error Code "0000"

    Where can the replacement controller be purchased. I have paid more than they can cost having my lift repaired only to have the same 0015 error code appear almost every time we need to use it on a job. I asked the authorize folks and they said nothing was offered. Glad I came across this post.
Top