• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. D

    D5G wiring diagram

    Can anyone help me out with a wiring diagram for my dozer. It’s a D5G serial number WGB03584. I am trying to find the signal wire that activates the alternator. Any help would be greatly appreciated. Thanks in advance.
  2. D

    D5G speed selector switch

    Hey everybody, My D5G SN-WGB03584 speed selector started acting up. I would start out in say #1 on the speed gauge and it would start out good then jump to #4 suddenly. I pulled the codes and got code #262, which says “switch deceleration”. So I have the switch assembly ordered and I was...
  3. D

    John Deer 35G evaporator access.

    I finally got it out and cleaned it. That sure ain’t a job for an old fat guy for sure. Thanks for the help.
  4. D

    John Deer 35G evaporator access.

    Does anyone know how to access the evaporator coil on a JD 35G.
  5. D

    Komatsu high speed tram not working

    The one track test didn’t work. Still no high speed. I can’t find the solenoid that everyone is talking about.
  6. D

    Komatsu high speed tram not working

    I don’t have any codes, the machine works great no loss of power just won’t go i to high speed travel. Its a two speed machine. I’ll try the one track test. Thanks
  7. D

    Komatsu high speed tram not working

    Does anyone know anything about where and how to trouble shoot the high speed tram on a Komatsu PC-160LC-7. The indication comes on the console when the button is pushed but it never goes into high speed. I checked all my fuses and they are all good and I don’t know where to even look now. Any...
  8. D

    Cat D5G lost electrical power to the ignigtion system.

    Email : devo416416@gmail.com SN# D5GWB03584 Thanks Nige
  9. D

    Cat D5G lost electrical power to the ignigtion system.

    My D5G WGB keeps blowing fuses on the ignition system. I believe it is due to a wire shorting out but cant find a diagram of that circuit. Does anyone have a copy of that system. Thanks in advance.
  10. D

    Hammer Issues

    I check with my local dealer today and he said that fluid leaking out of that vent hole was a sign that the hammer needs servicing, 700.00 Seal kit. WOW. What can you do but order one and get it fixed. Hope it not out of my capabilties to repair.
  11. D

    Hammer Issues

    Ok lol. It may be just a vent hole but anyway it has fluid leaking out of it. I'll try to post a pic.
  12. D

    Hammer Issues

    Howdy everyone. I just resently purchased a Komatsu PC-160 LC with a NPK E-210A Hammer. I used the hammer for maybe 12 hrs and noticed that it was leaking hydraulic fluid out of the exhaust hole of the hammer, not extremely bad but enough to make me stop before something bad did happen. It was...
  13. D

    D5G Parking brake issues again!

    I checked the alt and was getting 14.4 Volts the other day, then a few days later it brunt a belt off and then threw the other belt off and had some burnt rubber on the alt pulley. The alt still was free spinning, didnt make since to me but I figured that it had to have some sort of resistance...
  14. D

    D5G Parking brake issues again!

    CM1995 do you know what the voltage should be?
  15. D

    D5G Parking brake issues again!

    That looks simple enough. Ill try that soon as I can get it back to the shop. Thanks
  16. D

    D5G Parking brake issues again!

    We left the axels in but we did have it jacked up off the ground so it was free running. Is it a big job to pull the axels?
  17. D

    D5G Parking brake issues again!

    My Cat mechanic came by the other day and ran the diagnostics on my machine and it lead us to a bad track speed sensor. Got that changed out and calibrated and so far so good on the parking brake issue but I am still noticing that the machine wants to pull to the right so what. Any Ideas?
  18. D

    D5G Parking brake issues again!

    I did replace all the belts the other day because the alternator belts where streched out to the limt, and was a little loose. I am still having issues. Got a Cat mechanic coming out Friday to run diagnostics on it. Hopefully he can find my problem...
  19. D

    D5G Parking brake issues again!

    I sure hope that is all it is. Soon as I can I'll check it out and reply back. What is the correct voltage anyway?
  20. D

    D5G Parking brake issues again!

    I am back once again with parking brake issues on my D5G ( SS# WGB03584 ) This time the problem just comes and goes. I can be running it and the parking brake will engage and stop me dead in my tracks. It does show a fault on the dash next to the parking brake light when it does this. The only...
Top