• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. G

    Upper windshield replacement

    I have a 2016 XCMG XE210CU excavator and my upper windshield needs replaced..mine is severely cracked …asking if there are any other brands ( Sany, Kobelco, Deere etc .. that use compatible windshields and a good aftermarket company .. Thanks in advance
  2. G

    Deere 750c throwing code

    Today I adjusted throttle linkage ... didn’t do any good ..still randomly stops for no reason.... getting a 750k delivered in the morning..gotta get some work done! ... will either repair 750c later or who knows might trade it in on the 750K
  3. G

    Deere 750c throwing code

    Ok thanks! Yeah I noticed that rpms seemed high.. silly me thought maybe it was just running better since new injectors were installed..lol... that makes sense !
  4. G

    Deere 750c throwing code

    Just got it back from mechanic .. had a fuel injector malfunction so had six new ones installed, a valve cover leak repaired and while there had it serviced..engine oil change and final drive oil changed.... 100’ off the lowboy it stopped dead in its tracks..
  5. G

    Deere 750c throwing code

    PIN#847936....Rpm’s stay up in the 26 to 27 area
  6. G

    Deere 750c throwing code

    I have a Deere 750C that just suddenly started having a problem.. I can be tracking or pushing and it suddenly stop moving .. then a code F640 shows up in the dash . Anyone know what’s going on here?
    • Geno
    • Thread
    • Replies: 7
    • Forum: Dozers
  7. G

    John Deere 850JR

    Haha ! Yeah that would be plus for sure!
  8. G

    John Deere 850JR

    I’ve been looking and thinking about getting a military surplus Deere 850J..or “850JR” Has anyone on here had experience with these? Anything different from any other dozer that I should look for? Thanks in advance!
    • Geno
    • Thread
    • Replies: 3
    • Forum: Dozers
  9. G

    750C hydraulic filter

    Make sure the nipple that the filter screws too is screwed TIGHT into the the filter base before you install new filter.. It took me three years and several filters before I figured out what wrong Haha .. Benelli just figured out who you are
  10. G

    JD 750C hydrostatic transmission leaks oil

    Yeah I’ve been meaning to check with a local shop.. probably should look into that
  11. G

    JD 750C hydrostatic transmission leaks oil

    Hello I have a 1999 750c series 1 with 10500+ hrs that runs great works great .. I love to run it . But it appears that the front hydrostat pump has a seal leaking (about 3gal oil per day ) requires removing hydrostat in order to repair.. I’ve been advised to either get rid of dozer or get a...
    • Geno
    • Thread
    • Replies: 2
    • Forum: Dozers
  12. G

    JD 750C wont move.

    Ok no problem .. I’m new here .. sorry bout that. I’ll do better next time.
  13. G

    Deere 750C

    Your photo doesn’t show what I’m trying to refer to . It is on the top side .. not shown in photo... edit to add ... my mechanic just called me and said he thinks he’s got one that will work ... so hopefully problem solved thanks for all your help !
  14. G

    Deere 750C

    Yeah I know .. have my local neighborhood mechanic working on that for me ..was just looking for someone with a tried and true answer... thanks
  15. G

    Deere 750C

    I have a deer 750C ...With a oil leak that is coming out of the PCP valve spool. So my pop the snap ring and pull it out it seems to be a simple fix of just putting a new O-ring in. But the problem lies within John Deere does not list the O-ring as a part number therefore they want you to buy...
    • Geno
    • Thread
    • Replies: 4
    • Forum: Dozers
  16. G

    JD 750C wont move.

    I don’t mean to steal our butt in on this post... But I have a 750 C with an oil leak on the rear PCP valve spool.It seems to be just an O-ring but the problem is John Deere doesn’t list the O-ring as an available part#. you have to buy the whole PCP valve. I would rather do that.. And it looks...
  17. G

    Ashland pull scraper /John Deere dozer

    Deerert295 that’s good to know.. if I can ask ..how were the hydraulics configured on the Dozer to make it able to function with the scraper?
  18. G

    Ashland pull scraper /John Deere dozer

    I guess what I’m not sure about is that the dozers are hydrostatic drive . Am curious if any others have done this.
  19. G

    Ashland pull scraper /John Deere dozer

    Hello I’m new here so bare with me .. Has anyone ever used a Deere 750C to pull a scraper? I have a couple 750C dozers and couple of Ashland dolly wheel scrapers.. one a 9 yard and the other a 13 yd .. always have been pulled with farm tractors . But was pondering on rigging up hydraulics on...
    • Geno
    • Thread
    • Replies: 7
    • Forum: Dozers
Top