• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. O

    Volvo SD70D roller question

    So I have a Volvo SD70D and it needs some new hydraulic hoses going to the front roller and the vibration motor on the front. The hoses are all mismatched and the pressure ratings are all over the place. How do I know how much pressure these hoses see? I called my local dealer and also...
  2. O

    Case 721C transmission

    Thank you very much for the help Bigbert!
  3. O

    Case 721C transmission

    Hey everyone I am working on a Case 721C and I am looking for the torque specs for the converter bolts. I tried to call my local dealer but the information that they sent me is not for the torque converter bolts. I am looking for the spec on the bolts that attach the 2 spacers or flex plate or...
  4. O

    Cat 313F camera issue

    ok so I got the machine back from cat and there is a switch on the right side control panel that turns the camera on and off. I did not know this switch was there the symbol looks like a AA battery so I never tried it. They apparently didn't know it was there either because they were...
  5. O

    Cat 313F camera issue

    Hey everyone I just bought a cat 313F and I am having 2 minor issues with it. The first is that the rear camera display is always on when the machine is on. You cant see the gauges or anything because the camera is always on. I am not sure why this would be happening other that a stuck...
  6. O

    Cat 242B skid machine will not charge

    The machine will start and run but the idoit light is on and when I check the voltage at the battery while the engine is running the voltage is not 13 or 14 like it should be.
  7. O

    Cat 242B skid machine will not charge

    I have a cat 242b that I cannot seem to get to charge. I sent the alternator out to have it checked and it is was bad. I replaced it with new and the machine still will not charge. I took the new alternator off and had it tested and it is good. Where do I start to trouble shoot this I am...
  8. O

    D3G XL trans problem

    Thank you all for the help cat finally fixed it and I picked it up yesterday and it seems to be working fine now. They said the recalibrated everything and now it works as it should. They would not tell me what specifically was out of calibration but either way it is working now.
  9. O

    D3G XL trans problem

    I can not do any more work to it now because it is at the cat dealer now. I will let you guys know how I make out with it if I can ever get them to call me back. I have left messages and they dont return phone calls they were supposed to call me monday with what they found but that didnt...
  10. O

    D3G XL trans problem

    Well I have finally had some time to devote to this machine again. I still feel that the problem is in the decel pedal sensor but i cannot prove it. I took the machine to cat and showed the mechanic what it was doing. Then they call a few days later and say there is nothing wrong with the...
  11. O

    D3G XL trans problem

    Why would you say the et programs are out of my league. I have run a lot of diagnostic equipment on cars and smaller trucks plenty. Is the cat program much different? I did lube the little linkage between the decel pedal and the sensor.
  12. O

    D3G XL trans problem

    I removed the cps sensor and the end was covered in metal shavings. I cleaned it and reinstalled it till it touched the flywheel and backed it out 1/2 turn and tightened the lock nut. The machine still acts the same way it did before. I still feel like it has something to do with the decel...
  13. O

    D3G XL trans problem

    Ok I am going to clean the speed sensor today, I will let you know how it works out. Thanks again for all the help.
  14. O

    D3G XL trans problem

    I do not know what the rpm is the machine does not have a tach.
  15. O

    D3G XL trans problem

    I was able to erase all the codes the only code I have now is 222. I ran the machine a little and I am still having the same problem. I did notice that if i play with the decelerator pedal the machine will work as it should at times. Can the decelerator pedal sensor cause this problem. I...
  16. O

    D3G XL trans problem

    I will try erasing them in the morning thanks so much everyone. Should I erase one and run the machine and see if it comes back? Or should I erase them all and run it and see what comes back?
  17. O

    D3G XL trans problem

    Ok i was able to get the codes out, I was looking at the wrong light before. The codes are 254, 252, 244, 271, and 141. Thanks for all the help guys.
  18. O

    D3G XL trans problem

    The serial number is cat00d3gljmh02016. The speed does not increase with the left thumb switch unless the throttle is wide open. The gauge does respond at low rpm but the rest of the machine does not.
  19. O

    D3G XL trans problem

    I have a D3G XL and the hydrostatic drive will only move the machine at a very very slow creep unless the throttle is wide open. The throttle or speed selector wont make any difference in speed until you give it full throttle. Once at full throttle the machine works perfectly. My local cat...
  20. O

    Volvo L120E won't start

    Well I have not jumped it and it was sunny out when this one gave up. It looks like there had been some water in there at some point. It is amazing that it cost 6,500 dollars to fix the machine, 500 of that was to replace the fuel pump that was not causing my problem.
Top