• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. B

    Soil Screener identification

    Can anyone ID this screener? It is definitely old but still runs. Any help would be appreciated. Thank you
  2. B

    hydraulic hammer identification

    Just a followup. Its a Furukawa/Kent HB20G hammer. Got it hooked up and working but it has a small leak dripping from the tool bushing. Is that something that needs to be repaired right away or can I use it for a while and fix it later?
  3. B

    Bobcat S250 hydraulic leak

    I was using my 2003 Bobcat S250 (3400 hrs) to plow this weekend and I noticed the arms stopped lifting. I backed up a little and noticed a small puddle of yellowish-hydraulic fluid on the ground from the center of the machine. I backed up some more and within seconds I saw, what I can only...
  4. B

    International 175C information

    Thank you very much. I'll order it today. I took a few pictures just for reference
  5. B

    International 175C information

    So I used it for a few hours this weekend and saw antifreeze coming from the front of the engine. Moved it to a level spot, raised the arms up and put a brace under them and shut it down. Looks like the water pump went bad. There's a lot of wobble in the fan. Any idea what the part number...
  6. B

    International 175C information

    I got the service manuals and I was able to find a section on adjusting the brakes. I'm still looking for the decelerator adjustment page. We got it to do some big work on the farm we bought last year. We got a PC200 excavator last year (another piece of old iron) and the 175 will help move...
  7. B

    International 175C information

    I just bought an old 175C loader to use on the farm. I'm looking for some information on it. The serial number is 4290004U003648* It has pedal steer instead of the levers. Does it also have a decelerator pedal? The last owner said he just shifted between forward and reverse without...
  8. B

    hydraulic hammer identification

    I see on the Tramac 501 the hoses come off the sides, this one has the hoses coming from the front. The best match that I could come up with a Furukawa but I'm not sure.
  9. B

    hydraulic hammer identification

    I'm looking to purchase a used hammer for my PC200-3. I found this one online and I'm looking to see if anyone can identify the make or model. The seller says it works well just not needed anymore. It's in my price range if it fits. The pins are about 3 inches so it should match up with...
  10. B

    Komatsu PC200-3 hydraulic line?

    So I finally got around to looking into that hose that runs down the boom to the end of the stick. I followed it back to the pump house and into the tank. The other hose runs into a control box of some sort(?) that the aux hydraulic lines connect to. There is a wire (disconnected) to the box...
  11. B

    PC 200 Thumb install

    Here's a few more pics. I need to finish welding up the sides before I use it to remove an old rock foundation. I did mention I haven't done stick in a while right? :)
  12. B

    PC 200 Thumb install

    I plan on using it for land clearing and logging so I'll have to be very careful not to do that!
  13. B

    PC 200 Thumb install

    Its a Solesbee thumb that I found on Craigslist. It's definitely a beefy build. What do you mean by twist your stick? Is that really possible? I can't even imagine how that would happen!
  14. B

    PC 200 Thumb install

    I lifted the boom up and put the stick in a vertical position. I think I got it dialed in now for the 7018. It's an older model Weldanpower but it still runs great. I'll attach a few more pictures tomorrow.
  15. B

    PC 200 Thumb install

    Excellent. Thank you. I haven't done stick in a while (MIG has spoiled me) so getting used to running it vertical up has been a challenge.
  16. B

    PC 200 Thumb install

    I finally got around to putting a thumb on my PC200. I found it on CL and had it shipped. The guy who removed it from the other machine did a very nice job of cutting it out. I put it as close to the coupler without it interfering with the bucket curl. Just figured I'd post some pics...
  17. B

    Komatsu PC200-3 hydraulic line?

    The coupler is hydraulically controlled from inside the cab. What I can't find is a way to activate the aux lines. There are a bunch of wires hanging in the cab behind the seat but no foot pedal. I still haven't had a chance to open it up to see where that line goes. I plan on pulling off...
  18. B

    Komatsu PC200-3 hydraulic line?

    I'll have to take off the outside panel and check. Even the former owner had no idea. He suggested it was a low pressure hydraulic line. I'll open it up this weekend. Another question: Are the larger hydraulic lines on either side of the dipper for an hydraulic hammer? The machine has a...
  19. B

    Komatsu PC200-3 hydraulic line?

    Here is where the hose come to on the dipper. On end connects to the side of pump housing area and the other runs out to the dipper. I don't see any electrical connections or switches to control it, whatever it is. I don't want to take it off if it's something important.
  20. B

    Komatsu PC200-3 hydraulic line?

    I just bought a 1989 Komatsu PC200-3 excavator. It runs well but needs a little TLC. There is a hose that runs from a tank in the area of the hydraulic pump. The line runs down the boom to about 2 feet above the bucket. The end looks like an air line quick connector. The other end enters...
Top