• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. J

    Generac 50KW Info

    Still not running
  2. J

    Axiloc axle bearing torque

    I think I'll go back to the old style locking nut and washer though. Seems pretty foolproof to me.
  3. J

    Axiloc axle bearing torque

    Found a Axilok wall poster that explains the install. Says to torque to 200 lbs then back off 1/2 turn then re-torque to 75 lbs then back off 1/8 turn. and gives end play spec. Says nothing about a inner spacer. I think the inner spacer is only used in the Con Met hub with the set it and forget...
  4. J

    Axiloc axle bearing torque

    That 200lb. final torque is only if it has the spacer installed, right? Mine have no spacer in the hub. Only the Axiloc nut. And thank you for the part numbers
  5. J

    Axiloc axle bearing torque

    I need to replace the s-cam bushings on my 2000 Sterling Dump truck. Replacing brake shoes too. Question is: What is the proper torque procedure for the hub torque if using a Axiloc nut? And #2 are all the wheel seals two part seals or are they available as one piece? Thanks for the info
  6. J

    Grease Selection

    For me, it's a Calcium Complex for high speed bearings and a 5% moly for low speed, high load applications. Both are synthetic.
  7. J

    Machine ID Help

    Thanks Bob, it is a Traxcavator Wheel Loader. The owner thought it was a 922.
  8. J

    Machine ID Help

    A friend has a Cat Traxcavator and needs the water pump rebuilt. He doesn't Know anything about the machine but did find the serial number tag which says 90A759. Can anyone help with model, year? What engine it may have? Thanks
  9. J

    Sterling trucks

    https://www.dashdesigncorp.com/
  10. J

    Sterling trucks

    I have one with a busted up dash. I found a company in Miami that makes a replacement for around $2100.00 plus shipping. It's made of fiberglass with steel embedded in it.
  11. J

    Dump Truck Advice

    CDL is required for air brakes. And it does not matter what weight you register the truck. If the factory rated it at 26,001 or higher, you will need a CDL CLass B. Those rental trucks are spec'ed with hydraulic brakes.
  12. J

    Tire Size

    I have a 2000 Sterling LT9500 Dump Truck with 315/80/22.5 steer tires and 11R/22.5 drives. I would like to change the front steer tires to Floats. Question: What would be the correct tire and wheel size to use? Also, what setback for the rims? I don't want them to rub when turning. I also have...
  13. J

    Hough H60-B seal

    Can you make out any of the numbers on the seal itself?
  14. J

    2000 Sterling - which slack adjuster?

    Have a 2000 Sterling LT9500. Brake adjustment keeps backing off. Removed one of the slack adjusters that was not holding. It is a Gunite type with 5.5" length. Question is: I measured the distance between center of S cam shaft and the pin in the chamber shaft and it's 6". Called Freightliner...
  15. J

    2000 Sterling no elect power

    Found my problem.
  16. J

    2000 Sterling no elect power

    I have a 2000 Sterling dump truck.Cat C10 engine. It has been giving me trouble by not starting when I press the start button. After continually pressing it, it would start. I thought it was the start solenoid on the left fender. While changing it, I arced the wire to the starter. Now I have no...
  17. J

    Wacker RD880

    That's the trouble I'm having. Front drum spins but rear does nothing.
  18. J

    Wacker RD880

    I hope someone can steer me in the right direction to repair this roller. It has no drive on the rear drum. All movement is from the front roller. I see where the hoses to the rear drum motor connect to a distribution block. Any way to test. Pump whines a little when moving.
  19. J

    2000 Sterling Jakes not working

    Thanks Tyler, Ill try that. I also looked for a switch on the clutch pedal and linkage but found none. Accelerator pedal does not have one either. it only has a plug with wires going to ECM.
  20. J

    2000 Sterling Jakes not working

    Removed valve covers and operated jake solenoid,it wll activate. Ran 12v to solenoid and it works. Adjusted all valves, injector preload and jakes. Have power at jake on-off switch. Cruise control does not work. Not sure where else to look for cause of problem. The truck is a 2000 Sterling...
Top