• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. S

    Deere 6420 rear remote SCV leak down

    straight forward to rebuild just don't lose the load sense check valves / penny washers between the scvs they can drop down when you loosen the scv bolts and remove the scvs
  2. S

    CAT D7 with a Cummins NT855

    I looked at these chinese new Komatsu about 1997 as they were selling them new in australia they were older model dozers the one i looked at was a d85-6 from memory . had a video of them being manufactured not much health and safety there the track gear was made on a automated factory that was...
  3. S

    Manure value

    local contractor has a fleet of these, emptying dairy effluent ponds tractors and tankers have got bigger since photo was taken
  4. S

    Truck drifts trailer around corner

    Pinned by Dash Cam Owners Australia Dash Cam Owners Australia 12 hours ago Description: Back / Neck broken in 7 different places, Front seat snapped all bolts and landed on top of baby seat in rear, luckily no child in car that day. Driver is recovering well and back on the road now...
  5. S

    case 850 right track wont run in hi, looking for Case hyd tester

    hasnt stripped the pinion that drives the bull gear??
  6. S

    Massey or Kioti

    Worked for adealer that had Koiti. Seen one brake in half 100 hours, new clutches at 50 hours.
  7. S

    Marine diesel

    Its in german . the the sound of the old duetz, before shut off for the last time
  8. S

    Pulling a plow with a dozer

    Cat had a ag line until late 70s? Direct drive and wight distribution changes to make then better for pulling IH where big in the ag crawler line I do know people who have used normal torqe converter drive crawlers found not really suited
  9. S

    Anyone ever find any giant sinkholes while working?

    Company i worked for had a limestone quarry every now and then cracks would start opening under the crusher move it then excavate the cracks and open up the hole fill it then shift the crusher back.
  10. S

    John Deere 7330 Premium series air condition code 876.01

    etc 876.01 compressor clutch, power supply fault at power module pc6 check fuse f05/12 or f07/12 check lead 0732 tei fault check isobus socket , has can terminator build in
  11. S

    Cat 85D PTO

    Cheapest to find one at weckers with a pto and fit pto to yours
  12. S

    So you can learn from my dumb mistakes

    As a Service tech I enjoy these calls Somthing simple and easily fixed Bit of embarrasment, no stress and on to the next one
  13. S

    Localizing a Short

    the power probe sends a 400 hz sqarewave signal down the wire and this is what the signal tracer picks up
  14. S

    Care required using gas axe

    Had one a couple of weeks ago in field repair Dana front axle on deere tractor tie rod had snapped off at the joint., ball seized in with rust heating up as locktighted threads in end of joint where screws into steering ram noticed one side off joint starting to swell, stepped back joint swelled...
  15. S

    Deere 850k Blade not working- HELP

    sounds like a lot of guessing and swapnostics going on To me its problem that needs time to eliminate each section one by one I would check wiring and plug terminals, intermittant faults are time consuming to find.
  16. S

    LED flashlights are a cruel joke

    the big problem with these led flashlights is the powerful magnets left another one attached to a transmission this week. wasn't until the next day when i was looking for it, not worth a 2 hour drive to see if its still there b too much of a hurry packing up and off to the next job
  17. S

    Belarus 825 - needs a new clutch - any idea of rough cost to repair?

    I would allow 2 days labour , You might get it done in 6 to 8 hours But its an old tractor you got second hand Its the fiddly little things that are siezzed , missing or broken that blow out the time.
  18. S

    Blue tooth pressure transducer

    Only downside that I can see, You have finished the job, packed up and an hour into the journey home. Then its did I get that tranducer off from underneath? stop search the truck, then retrace your steps. and there it is small and where you left it. not that i have ever done something like...
  19. S

    Heytesbury D7

  20. S

    Heytesbury D7

Top