• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. W

    Muddy slip

    Friday I almost got stuck, looking forward when I should have been looking back. I stopped and put a chain on to keep it from sliding, then drove out with a left turn.
  2. W

    Hydraulic to 4 in 1 bucket

    Not sure what I did to the bucket but it will not open or close, everything else is working good. There is a high pitch noise and vibration coming from the hydraulic control value area , I have not removed the cover to look lnside. Got any ideas on the bucket trouble, sam. 931 b
  3. W

    Liability insurance, in Virginia

    I'm looking for a insurance coverage for my loader, and job site. Location in the roanoke county. Anyone know of an agent, or good company, sam.
  4. W

    Erosion control engineers

    The county's engineers gave me 7 day's to submit a site plan, and erosion control plan, is that normal ? Also they said that they can fine $ 1,000 day. Also the plans have to be from a certified engineers. Advice please. Sam.
  5. W

    Corner bucket adapter

    I need a part number for the corner adapter on a 931b cat , 4/1 bucket, i have installed the 9j4207 adapters and new teeth, all i need now i is the corner adapters no#. thanks, sam.
  6. W

    edervillenc tractor show

    Hello HEF, If you are ever in this part of NC, take a little time to visit the site, edervillenc.com. You can see some of the old equipment online but it is something to see in person, 100's of everything, steam eng. to trucks, they have a huge collection. There is a 3 day event each year but...
  7. W

    Clear old road

    Hello HEF, I almost didn;t make it up the hill, wet and slick clay and mud. sam.
  8. W

    Axels for a 12 ton trailer

    Hello HEF, I'am thinking of building a 12 ton trailer, where do i find the wheels and hub's, any online stores?? sam.
  9. W

    Missing part

    Hello HEF, I think that i,am missing a weather strip that goes between the hood and dash on my 931b, my book does not show the part. Does anyone know the part no. , i fixed a couple brackets to hold it up, thanks for any help, sam.
  10. W

    New Drive shaft install

    Before i put the belly pan back on... I though that maybe replace the U-joints, no tellen how long they have been there and only one side wanted to take greese, and with all the greese coming out on that one end, made me think too much play. Here is a couple photo's of the shaft and parts.
  11. W

    Re-Coil Spring, Need to replace

    Hello HEF, I want to put new rails on the old 931b, at first i was going to leave the old recoil on, but after second though, mabe i should replace both of them. Iam not sure if the springs are the correct ones anyway, when they are on the machine, leigth 19'' , and before compress 24''...
  12. W

    Repair Mult-purpose bucket Cyl.

    The Bucket Cyl. were leaking, and needed a fix, i noticed that the seal was not installed correctly at the top, atfter removing it had a lot of dirt under the collar nut...
  13. W

    Small cracks

    Hello HEF, I have been trying to paint my 931b and have found 3 cracks so far, one is near the top of the bucket close to the hinge. There are 2 at the bottom on each side where the front is attached to the frame. What is the best way to weld?? or should i weld on a steel plate over to...
  14. W

    lever berings replace

    Hi, HEF , I need to replace the bearings in the lever arms, the bottom have a lot of movement, my repair manual is does not have any info on the removal and repair. I have broken the bolts loose and the pins move free, should i take the inside lever off first?
  15. W

    Hyd. Tubing

    Hey HEF, The tubing that goes to the lift arm is bent badley, the fitting looks like its welded on, or is it sodered on, its 5/8 d. Also i'am having trouble finding the Hyd. Tubing. I need to redo the tubing to the bucket also. everyone says to use rubber hose, I'am not sure about that...
  16. W

    Left side Track Adjustment Grease inlet

    The old 931b will not take grease to adjust the track. I know i have seen some threads on grease fitting not taking grease, How to unstop or should i remove the inlet valve? Also if i remove the 4 bolts on the cover plate will it come out with out damage to the seal?? I have a Lincoln...
  17. W

    Grouser Re-build

    Hey HEF, Has anyone had experence welding new bars on the grousers, i have tripel bar grousers and they are worn down to the bolt head, what type of steel do i need, and how big a welder. I 'am starting to remove the grouser's to get redy for new track's, I though i could weld on 1/2 x 1/2...
  18. W

    New Roller install

    I am getting ready to put the new rollers on my 931b, i noticed that about 3 of them have greese where they have been lubed, the greese looks kinda green, should i double ck to make sure they have greese???? thanks.
  19. W

    Best T0-4 @ Best Price

    What are you paying for oil, Does anyone like a brand or Manfg. co. , I found some at the zone for 40.00 for 5 gal. Called Costal Multrack, Does anyone use it, or recomend other places that are not to expensive. Thanks.
  20. W

    Streering Clutch repair Cat 931b

    I want to start the replacement of the streeing clutches, should i jack up the loader to do the job ? Does anyone have experence with this type of loader and the clutch brake system etc. . Thanks wosama931b.
Top