• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. B

    Genie Z80/60 Drive Problems

    I replaced the board. It's working now. Still p,ss me off . Can I update an older board. No help from genie. Just buy it for a $1000." Solve alll your problems". Seen some burnt connections on the 4 prong plug, J -4? Cleaned them up,New board, all is good. FOR NOW?
  2. B

    Bobcat 753 "gushing" hydraulic fluid beneath seat on right hand side of machine.

    It could,also be the hoses for the power bob-tach. If you have one. The valve is on the back side of the hyd.pump/ right side of the machine.
  3. B

    Genie Z80/60 Drive Problems

    All the joysticks go out at once. The toggle switches will still work. I was checking connections in the platform box, and noticed a slightly burnt connector on the J3 plug at the top righthand corner of the board. Connector has 4 wires in it. Also looked up a replacement board. Seems the board...
  4. B

    Genie Z80/60 Drive Problems

    Sorry, I meant 10000 watt light towers. The generators don't seem to last very long
  5. B

    Genie Z80/60 Drive Problems

    This is a "Z-60" Never heard or seen a service rep, since probs with the 10000 lightowers
  6. B

    Genie Z80/60 Drive Problems

    I'm in alberta, not sure of the age, but the serial #4950. Never replaced the board. Only problem i,ve had is the bleed valve /pilot. Can I update this ?
  7. B

    Bobcat t200- heavy smoke under load

    Bgg It,s not that hard to spot a turbo problem on a duetze,or any turbo. Pull the intake hose. If you feel any ressistance, pushing in or pulling out,wiggling the shaft. The turbo could be the problem. Not alot of tolarance with turbo`s.
  8. B

    Genie Z80/60 Drive Problems

    Bgg Sorry to intterupt.Not getting much help from genie tech support. Just replace the board is what they say. Z60, all joystick controls go dead, toggles are still active. No codes. Recalibrated all three joysticks. All is good for 1-4 hours. No codes coming up on the board. Then the same...
  9. B

    Genie Z60/34 boom lift

    I,m new here too. I,m having problems with my Z60. I, intermitently, loose all my joystick functions( all three joysticks) The toggle switches all still work. To get the unit working again, I shut the machine down and restart it, and it works. I,m not getting any codes on the board, and I have...
Top