• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. S

    In need of 12V71 Detroit Diesel mechanic

    Thank you for your time on this matter I really appreciate .steve931
  2. S

    In need of 12V71 Detroit Diesel mechanic

    I have a customer with a generator that has a 12V71 Natural Detroit Diesel with no oil pressure. I am not fimillar with the oiling system of this engine. I need name and number or e-mail address of a good Detroit Diesel mechanic. I understand this engine is also used in a lot of marine...
  3. S

    Cat928F Diesel Fuel Pick-up Tube

    Thank's for your time. The fitting that screws into the tank and the fuel line attaches to is fairley large so I tapped it on the bottom to take a 3/16" brake line fitting. I then punched a hole in the stop in the pick-up tube attached a 3/16" brake line (cut to lenght) to the fitting and...
  4. S

    Cat928F Diesel Fuel Pick-up Tube

    I have a customer with a cat 928-f that is pulling air around the fuel pick-up tube. Cat tells me that is not a replaceable part you have to buy the whole fuel tank. I removed the fuel line and fitting from the metal block that is welded on top of fuel tank. The pick-up tube looks like it is a...
  5. S

    Cat928F Diesel Fuel Pick-up Tube

    I have a customer w-928F wheel loader that is pulling air around pick-up tube in fuel tank.Cat said yuo have to replace the whole fuel tank that you cannot buy just the pick-up tube. I removed the fuel lione and fitting that goes in the metal block that is welded on top of fuel tank. The pickup...
  6. S

    Deere 450B Head bolt torque specs.

    Thank you so much for your time on this matter. This really helps when people like you take time to answer questions that you have knowledge about. I try to answer other people questions when it is something I have knowledge about. Again thank,s a lot. Steve931
  7. S

    Deere 450B Head bolt torque specs.

    I have a customer w/450b John Deere w/300 series 219 c.i. head bolt torque and sequence specs.in need of. Thanks for your time. I will return favor when possible.:usa
  8. S

    Timber Jack 380A Transmission PTO problem

    I have a customer with a timberjack 380a skidder and the top drive shaft out of the back of transmission that powers the winch quit turning. I need any info. possible of how this is assembled in the transmission. Thanks steve931:beatsme
  9. S

    6BTA Cummins Head Torque Specs.

    Thank you for your time. I had to purchase a manual on 6bt cummins due to time restraints but I appreciate you answering my question. steve931
  10. S

    J.Deere 544A oil in flywheel housing

    The 544a is a good machine,parts are easy to find and used parts are available.The most expensive is the transmission, be sure to check it good.
  11. S

    690B J.Deere Track Loader Won't Steer

    The machine will move forward and reverse but when you try to stop one track and make the other track turn it will not pull machine around.I have heard it was in pilot valve system.Any help will be apprecited. Thank's steve931:beatsme:usa
  12. S

    6BTA Cummins Head Torque Specs.

    I need torque spec's on 6bt cummins 12 valve head and sequence if anyone has them,thank's steve931:beatsme:usa
  13. S

    J.Deere 544A oil in flywheel housing

    Thank's for your time,that's a good tip.steve931
  14. S

    6BTA Cummins Head Torque Specs.

    I have to replace head on a 6bt cummins 12 valve approx. year model 1990, I need torque specs. if anyone has them. Thanks steve931:usa:beatsme
  15. S

    J.Deere 544A oil in flywheel housing

    I changed the rubber dampners on a 644 John Deere but I am not sure this 544 has the same system.I am going tomorrow and do some work on this customers 928 cat. I will take a closer look at the 544A again many thank's for your time.
  16. S

    J.Deere 544A oil in flywheel housing

    Thank you for you time I appreciate your reply. I thought this engine had a dry flywheel but was not sure,again thank's steve931
  17. S

    J.Deere 544A oil in flywheel housing

    There is a bell housing that covers flywheel, the yolk for output shaft is outside bell housing,I need to know if this machine has a oil bath flywheel. Thank's anyway.
  18. S

    J.Deere 544A oil in flywheel housing

    Does a John Deere 544A have a oil bath flywheel or is the rear main seal leaking. Thank's steve931:usa
  19. S

    J Deere 690B low hydraulic pressure

    690 reply :usa:notworthy:usaThanks for the offer. Yes, this forum is nice to have. Sorry about being so long on this reply I had forgotten about this machine util the other day the owner called and ask if I would take another look at it (This time he said he would pay me) he wanted to try and...
  20. S

    J Deere 690B low hydraulic pressure

    Thanks for the offer. Yes, this forum is nice to have. Sorry about being so long on this reply I had forgotten about this machine util the other day the owner called and ask if I would take another look at it (This time he said he would pay me) he wanted to try and sell it. Again thank's steve931
Top