• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. AllDodge

    Stump and Tree digging with 955

    Friend ask if I would bring the 955 (triple grousers, Reg bucket) over to dig out some trees and stumps for his new house. Well....... it's not going so good. Took down a couple Ash trees with not a lot of dogging but the Beach and Oak no way. Had to use the hoe (416) and dig them out. It...
  2. AllDodge

    CAT 1R-0750 Fuel Filter

    Bought 2 fuel filters a couple years ago and just found out I messed up the number. One is opened because I was in process of replacing, would not fit. The other is still in shrink wrap. CAT wants $29.46 each, how about $10 for both and you pay shipping. I need 1R0710
  3. AllDodge

    What Tool or maybe have it done

    416C serial in Sig Bucket cylinder needs resealing so thinking of doing my self but looking at the outside and inside nut and need something to help. Used this hoe to do the 955 cylinder work but don't see using the 955 to work on the hoe.
  4. AllDodge

    Cat P5000

    SN AT3503871 Don't know how old the lift is (at lest 10 yrs) but it only has 1075 hours. Had water in the oil so changed it twice and let it run for about an hour to burn off the rest. Noticed after about 45 minutes I heard the motor die. Walked over to the barn and fired it back up. Let it...
  5. AllDodge

    sis lookup for Forklift

    Picked up a P5000 Cat forklift. Went to SIS and tried looking up the oil filter part number and its unable to recognize the SN. Its AT35003871 with attachment SS39P251 Maybe I'm putting it in the wrong place but have no issue with the other stuff I have
  6. AllDodge

    Diesel Fuel Chemicals

    Have used Power Service for years, but do think its like Lucas products, cost more due to advertising. Anyone use FPPF Chemicals before, like FPPF 00119 Killem? Appears it is higher concentration and cost less
  7. AllDodge

    955 Oil cooler

    Sure wish I could get notifications again someday :( Any way, Started up the old girl after sitting for 6 months to get the fluids moving. Moved her around some and noticed a drip and sure enough, leak near the bottom of the cooler. Removed sides and front grill to get a better look. Can the...
  8. AllDodge

    955 Oil cooler

    Sure wish I could get notifications again someday :( Any way, Started up the old girl after sitting for 6 months to get the fluids moving. Moved her around some and noticed a drip and sure enough, leak near the bottom of the cooler. Removed sides and front grill to get a better look. Can the...
  9. AllDodge

    How to check oil Level

    Grove MZ66 printed on the side next to the fill cap, says check level with arm horizontal. The fill pipe comes out the side of the tank then 90* up, followed by maybe 2 inch long pipe with a breather cap on top. I cannot find a dipstick, sight glass or anything to check the level. Have any...
  10. AllDodge

    Power rake or Preparator

    After some construction I need to get the lawn in shape. Have spread around dirt with the backhoe and need to do some smoothing this spring. Rental place has a power rake and Preparator. The power rake will go deeper it seems, and don't know if that would be a benefit or not, just want it...
  11. AllDodge

    Shipping for 500 lb pallet

    Looking for a LTL shipping out fit for one pallet 513 lbs, 4ft x 3.5ft x 3ft high Fresno CA to KY
  12. AllDodge

    Land clearing Hire/Rent

    Have 24 acres with some brush and small trees have grown up over the years about 20 feet from the fence line. I have equipment (list below) but wondering if renting a CTL with a drum or brush cutter would be best bet. Could also hire someone but renting sounds like best route. Seeing about...
  13. AllDodge

    D3B maybe C

    I'm thinking CAT did it to me AGAIN Could be that or SIS as usual is not up to date My throttle cable had a lot of slop, so looked up the part 5G2315 and bought one. The entire cable is a bit longer then the one which was one it, but that was not an issue. The problem is from where the nuts...
  14. AllDodge

    JIC fittings

    I screwed up and need to know how not to do it next time. I thought 3/8 ID would be 3/8 ID but looks like its not. Ordered new lines and measured the ID of the fitting so choose same size lines and fittings. The lines are labeled 3/8 ID and are smaller then the ones removed, but so are the...
  15. AllDodge

    Torque

    D3B lift cylinders and manual list 800 ft lb +/- 80 on the piston bolt. Bolt is a 7/8-14 thread My torque wrench goes to 600, so looked up turn to torque and it list Turn torque = pre torque 480 ft lb then 1/3 more Torqued to 480 then using a 3/4 impact was only managed to turn the bolt...
  16. AllDodge

    CAT Sealant

    What is used to put metal surfaces together, as in cover plates over clutches? Its orange and feels like silicone and its orange
  17. AllDodge

    D3B steering clutch attachment

    Need an idea of how to get the second clutch bolts installed Installed bolts on one side and part of the other clutch. Need to rotate the sprocket on one side only to align bolt holes, or work clutch (20 ton maybe) so inner/outer will move. My 3 ton forklift won't lift one side using the rops...
  18. AllDodge

    D3B or 931B

    Anyone know the thickness or the clutch plates and disc on a D3B or 931B?
  19. AllDodge

    D3B Clutch and cylinder rebuild

    Decided to get into removing the clutches, and while I'm at it need to have the lift cylinders rebuilt. Drained the hydraulics, then removed the seat, battery and down to the hydraulics and linkage. The good think is most things are 9/16 of 3/4, the bad, is some of the 9/16 bolts have very...
  20. AllDodge

    D3B Starter

    What do folks think about some of the aftermarket starters? CAT Part number 4N0241 CAT reman 10R5355 cost $655.14 core $635.00 Roberts and sons $395.00 https://www.robertsandson.com/product/190-50146/&q=17103 Rebuilt the motor and it needed another starter, so figuring I'm non-commercial I'll...
Top