• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. G

    Zx160lc spool valve sticking maybe???

    How hard is it to check the centring spring is it under spool cap or do your need to remove spool completely?
  2. G

    Zx160lc spool valve sticking maybe???

    So it worked fine when first got the hammer has a line from hammer inlet to greaser then one line from greaser to hammer for grease to flow through
  3. G

    Zx160lc spool valve sticking maybe???

    Its an interlube and hammer mounted
  4. G

    Zx160lc spool valve sticking maybe???

    Hey you have been able to help me in the past figure out a couple things. I’m curious if you might be able to help on something else. I have a zx160lc-3 hitachi. We have a hydraulic hammer on it with an auto greaser, it suppose to put out one pump of grease every time the aux circuit is...
  5. G

    Cat 950g (3126 mech) wont stay running

    3jw02890 is there anything else that would cause start and diesel instantly and if u keep rolling engine it will act like its trying to fire but not enough fuel. I pulled return line off and lots of fuel coming out.
  6. G

    Cat 950g (3126 mech) wont stay running

    So a momentary pulse push’s the button out and latch’s allowing fuel to flow. Then a momentary pulse release’s it to closed position
  7. G

    Cat 950g (3126 mech) wont stay running

    Ok got a 950g with a 55k prefix 3126 engine its the mechanical version. It was running great driving along, and then it started to stumble and loose power. It just had new injectors put in it couple hours before for same issue. Had cat set the overhead, so now soon as you turn the key it fires...
  8. G

    Deere 250D no start

    Also the first thing i did was checked for switched and unswitched power and ground going to ecm
  9. G

    Deere 250D no start

    So when i put my laptop on it i can clear all the codes and those are the only to that come back and say active if you unplug sensor it pops up right away and if you plug them back in they go away. My service advisor is being a pain in the ass it wont load on my computer use to work fine been...
  10. G

    Deere 250D no start

    Its cranks yes, sn BE250dt201062. And yes positive lead on frame rail and negative on disconnected ground of battery it shows 24v positive. I’ve noticed the ecm makes a clicking noise continuously also well just sitting with the key on, when you turn key off it stops clicking, is there any way...
  11. G

    Deere 250D no start

    Ok guys a year ago my rock truck with a 6081h engine with common rail fuel system had an issue where it wouldn't engage all axles. The mechanic took it out of truck inspected the transfer case, i I found a bad air line that engages the axles. Now for some reason he took the batteries out of it...
  12. G

    Cat 289c2 right final drive wont move

    3350 hrs and rtd00643 also when u try to turn right side only it loads the pump up and pulls engine down like its trying but it just cant move more then quarter inch each way on that track
  13. G

    Cat 289c2 right final drive wont move

    Ok so i have a cat 289c2 we were working away on a job yesterday when all of a sudden then orange exclamation mark came on and then right side track sounded like it was coming off. Stopped got out checked track nothing wrong got back in light was still flashing went to move and the exclamation...
  14. G

    How to adjust flow pressure on 315cl Aux

    I will find out in morning get different pressures and post back appericate the help cant remember how i did the other 315.
  15. G

    How to adjust flow pressure on 315cl Aux

    I've tried adjusting through the momitor makes no different because machine doesnt have a pump controller to tell it that aux function is activated
  16. G

    How to adjust flow pressure on 315cl Aux

    I think I'm gonna have to buy the aux pump controller to make it work at 4k in canada for 171-0188
  17. G

    How to adjust flow pressure on 315cl Aux

    Pressures are messured off the pump head and the inline regulatoe i have at base of boom where hose go to valve body have gauges at both when aux curcuit is active nothing else on that curciut wl activate because using 100% flow to aux curcuit. But soon as u let off the pedal you can work all...
  18. G

    How to adjust flow pressure on 315cl Aux

    Cft00323
  19. G

    How to adjust flow pressure on 315cl Aux

    But still doesnt increase the aux curict pressure
  20. G

    How to adjust flow pressure on 315cl Aux

    Ya you dead head the lines and the pressure remains the same and the line reliefs are max out and not releasing oil and its all the pump makes unless u activate a different circuit then the pump jumps 5000 psi
Top