• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. S

    John Deere 410 Engine Rebuild HELP

    resized all 4 on my 310a, were not tongue and groove, but 410 might be different.
  2. S

    John Deere 410 Engine Rebuild HELP

    better have all the connecting rods checked and resized if necessary or you,ll be doing it all again shortly.
  3. S

    JD 310B Wiring At Alternator

    i have an 81 model 310a that has wiring that looks like yours,that particular wire on mine appears to have been cut off by the previous owner and my system still charges properly,probably a ground,the tach is cable driven off the back of the camshaft, the other black wire on mine hooks to the...
  4. S

    JD 310A clutch adjustment

    that pressure is 150lbs. not 1500. it has to be done that way to get adequate pressure to engage the hydraulic clutch pack, the second step just gives the throwout bearing some clearance on the dry clutch.
  5. S

    Hydraulic pressure issue

    glad you got it fixed,i came by one day a couple weeks back, but didnt see you outside,but i will stop by again,congratulations,
  6. S

    Hydraulic pressure issue

    ok let me know if you want me to come take a look
  7. S

    Hydraulic pressure issue

    just to add to what information you are getting from other members, i have also heard of the relief valve for the transmission filter,being stuck open by a piece of debris,might want to check that also.
  8. S

    Hydraulic pressure issue

    haven.t heard a progress report, still interested
  9. S

    Hydraulic pressure issue

    sounds good,by the way o got my repair manual on line, just downloaded the manual,was a pdf file,can,t remember where from,but i,m sure you can find it like i did.
  10. S

    Hydraulic pressure issue

    keep me informed. i am interested to know what you find out.
  11. S

    Hydraulic pressure issue

    it is definitely a closed center system, i was always under the assumption that weak low side pressure was directly caused by something on the input side, but i could be wrong,i,m sure shane at flint equipment might could clear that up.i am 1 mile south of 96 on moody,let me know if i can be of...
  12. S

    Hydraulic pressure issue

    i am not an expert by any means,i happen to own a a 310a and have done a lot of work on it in the last few years. it looks like you have a supply problem.sometimes that can caused by a clogged screen or very dirty filter, or low fluid level,i would clean my screen first,if you need any help,let...
  13. S

    JOHN DEERE 410B

    i have a 310a that gave me the same trouble you are having,but mine would take about 5 minutes to go in forward, but would go immediately in to reverse,when i was doing some engine repair,i rebuilt my forward clutch pack,which was badly worn,it fixed my problem,goes in to both forward and...
  14. S

    JD 310 crank pully problems

    my 310a did the same thing, mine was caused by a seized hydraulic pump. ended up pulling the engine and replacing the crank,pulley,and hydraulic pump, ouch!!!,but in the end it worked out great.
  15. S

    John Deere 410 Backhoe won't move forward

    sorry i can,t be any more helpful,but i really am interested to find out what the problem is. hopefully you will take time to let us know the results,thanks Steve from ga.
  16. S

    John Deere 410 Backhoe won't move forward

    i geuss this sounds obvious,but are you sure that your dry clutch is operating properly,sounds like you replaced all the parts that i put in mine,and mine works fine.
  17. S

    john deere 310a seized hydraulic pump

    well i finally got the old 310a back together.i rebuilt the engine,rebuilt the front clutch pack,and removed the reverse brake,inspected the clutches,and resealed everything.when i got the fuel system bled out,it fired right up,idle a little funny for about 5 minutes,and then smoothed right...
  18. S

    John Deere 410 Backhoe won't move forward

    if you can get a copy of the service manual,it will give you instructions on how to adjust the clutch linkage,it has an effect on the pressure that goes to the clutches,i am in the middle of putting my 310a back together after an engine overhaul,forward clutches,and a reverse brake inspection. i...
  19. S

    1974 jd 410d problems. clutch shifter.

    thanks for the reply,i will be sure to watch out for the things you mentioned,thanks again.
  20. S

    1974 jd 410d problems. clutch shifter.

    i am interested what you did wrong,i have my 310a torn apart,have replaced the forward clutches and some sealing rings,but i just bolted mine back together,not knowing what could go wrong.i am working on the reverse brake right now,so if there is something that could cause a problem,i would...
Top