• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. J

    Hyundai Loader Parts

    Hi there, I’ve got a 2001 Hyundai 740-3. The damper between the engine and transmission went bad earlier this summer. Part no. Is 11L7-0031 pic attached from parts book, and of the damaged damper. This part is almost impossible to find, Hyundai has said it’s back ordered, I wonder if they’ve...
  2. J

    ZF 4WG 200 Issue

    Update. I didn't check the screen/filter on the suction tube when I changed the oil originally. I wanted to get lighter weight oil in it, so I did that today. Suction screen was clean. Put in 5w40 oil. Still acting the same. I haven't checked pressures yet, that's next step. There is two...
  3. J

    ZF 4WG 200 Issue

    I was running in 3 on the selector, if I remember correctly I did at one point have it in position 2 and it did kick down, but I can't say with certainty, so I will have to remember to try that next storm. Thanks!
  4. J

    ZF 4WG 200 Issue

    Hey all, wondering if this new information helps provide a better idea as to the issue. I haven't had the chance to pressure test yet, but we got our first snow call-out yesterday! It was awesome. Just about 10-12 cm but enough to have some fun. The loader pushed snow awesome. This being the...
  5. J

    ZF 4WG 200 Issue

    Thanks all. I had used 15w40 this fluid change. If I find pressures are OK, I may switch to 5w40 as suggested. I'm also planning to send an oil sample to get tested to be safe.
  6. J

    ZF 4WG 200 Issue

    Thanks Bigbert. That's good to know. Do you guys happen to know the fitting size for the pressure test points?
  7. J

    ZF 4WG 200 Issue

    Thanks for the advice! I figured a pressure test was likely the first step. Appreciate the recommendation. It looks like Bull Powetrain is in Sudbury which is a good 5 hours north of me. I'll do a search for someone more local.
  8. J

    ZF 4WG 200 Issue

    Hey all, I've got a 2014 Liu Gong CLG 842 III loader with just under 2000 hours. Got it off auction this summer, it'll just be used for snow. It's actually a nice machine - ZF drive train and Cummins engine. Hasn't done any work yet, just been driving it around for fun. First couple months had...
  9. J

    Snow Wing Hydraulic Plumbing

    Where do you fill the trans fluid on these?? 8400 trans. Plan do a fluid and filter change this week, took a quick peak and didn't see where to fill. Very possible I missed something obvious..
  10. J

    Snow Wing Hydraulic Plumbing

    Well it turns out Jade was pretty reasonable for the cable. They had used and new in stock. I took two used ones. The new ones from Jade would have been about the same price to buy from a custom cable place nearby (a local hydraulic shop put me in touch with the cable place). The used ones were...
  11. J

    Snow Wing Hydraulic Plumbing

    Ya, they are cables directly from the levers to the valve manifold. Our other graders are direct linkages and that seems to be a much more reliable system. Ill try lubricating the spools. I've got an equipment supplier who has the Champion part no. for the cable on record, they are looking to...
  12. J

    Snow Wing Hydraulic Plumbing

    I had thought that. The cable was definitely in really rough shape. The mold board slide lever is sticking as well. Almost popped the right front tire a couple days ago because I didn't notice it sliding out on its own. Sprayed some oil down the cable last night, I'll see if that helps. What's...
  13. J

    Snow Wing Hydraulic Plumbing

    anyone ever replaced the cables from the lever to the manifold? Just getting the old one out was a pain, we tried to tie a rope to it to pull the new one in, but that made it impossible to remove the old one. im gonna call Jade equipment tomorrow to see about the cable. any other ideas for...
  14. J

    Snow Wing Hydraulic Plumbing

    It is very possible that mods were done.... I hadn't noticed that before, however just did a quick image search and seen some pictures of 710's with just a single cylinder. Maybe only on the 716s and smaller? We don't use the moldboard much for plowing (and that is all we use this machine for)...
  15. J

    Snow Wing Hydraulic Plumbing

    Good point cuttin edge. Didn't think about that. Not sure what the purpose is. Either way I got it plumbed yesterday, and my brother in law and I got the wing mounted and functional today! Unfortunately we found out the cable for the one way plow on the front was broken (hoping its just the...
  16. J

    Snow Wing Hydraulic Plumbing

    Yes good point. It is a cable lift. Up and down on front tower, up and down and in and out on rear tower. That's kind of why I was confused about the PRV that seems to just serve the back tower. The wing is floating on cables. I could see the need for PRV for the in and out cylinder? Maybe that...
  17. J

    Snow Wing Hydraulic Plumbing

    Thanks Dave. I've talked to one of their sales guys a few times. I'll check with him.
  18. J

    Snow Wing Hydraulic Plumbing

    Took a look that manual, thanks for referring me there. On the series III there is 2 relief valves attached to the hyd tank. Both of those are present on our machine. We actually have another relief valve (must have been added at some point by someone) mounted below the rear tower mount on the...
  19. J

    Snow Wing Hydraulic Plumbing

    Thanks Dave. We've got another solenoid valve off an older grader which we know works, in case this one doesn't. We've got a one way plow on the front so we have to use the solenoid valves. I'm 99% confident in teeing off one of the hydraulic lines, just hoping to get some confirmation.
  20. J

    Snow Wing Hydraulic Plumbing

    Hey all, first time posting. Got a 1993 Champion 716A that has run without a wing for a number of years (wing was removed before my father-in-law bought it). We are putting a wing back on it for this snow season, got the towers mounted and front tower hydraulics working. Were a bit confused...
Top