• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. tjcoogan

    Dozer blade ?

    Not sure on the ASV machines but on the Cat the aux electrics there is a cab mounted toggle switch to activate the circuit, check the fuse box and relay for that circuit. Usually aux elec is an add on option with harness, connectors and hand control unit etc, get a wiring diagram and check if it...
  2. tjcoogan

    Road grading with ctl?

    I’m a big fan of the Power Box Rake, I use a Cat PR184 the same as the Harley MX7 and do a lot of long rural gravel & clay driveways with it. One advantage is that you can run a light scarifying pass over the area prior to puting down your top surface this will minimise any delamination between...
  3. tjcoogan

    Chaining the blade

    I wasn't aware you could use lifting grade chains for load restraining. Don't they meet different standards and are rated according to the intended use i.e. Working Load Limit or Lashing Capacity. How do you go using 1/2" binders on the 3/8" chain are the clevis/grab hooks loose in the chain link?
  4. tjcoogan

    Would You Haul it ??

    Here is a link to our load restraint guide
  5. tjcoogan

    Have snap binders been outlawed?

    I've moved away from snap binders and have been using, with great success and safety for that matter, a binder combining the old style dog and ratchet tie down in one. Here is a link to check out. Not sure if they are available overseas though.
  6. tjcoogan

    Chaining the blade

    Interesting topic I have recently moved away from using the old over centre dog style load binder and now use Ausbinder Loadmax Series 3 ratchet binders it is a combination of the old style dog and ratchet tie down. Not sure if they are available or approved for use OS buy here is a link with an...
  7. tjcoogan

    Earthmoving Company Taglines or Slogans

    Recently I saw a large Kenworth tow truck with a slogan on the sleeper box "far Kenworth it"
  8. tjcoogan

    Skid Steer Slasher

    Thanks for the info so far. My intentions are for grass cutting and light scrub only on terrain that a Cat MTL can traverse using a 1.6m wide std flow Timber Wolf/Cat brush cutter.
  9. tjcoogan

    Skid Steer Slasher

    Hoping that you experienced guys can shed some light on the pro's and con's of slashing/brushcutting with a tracked skid steer. I have heard that the discharge from some slashers can vent back into the inside of the tracks and cause issues. I was also wondering if you can safe guard against...
  10. tjcoogan

    Hydraulic quick connect isn't so quick

    I only seem to have issues with my 4in1 being hard to remove and replace at times. Now I just crack open the clam jaw a little and it helps, I don't seem to have any issue with any of my other attachments that run on Aux hydraulics though. Connecting the work tool hydraulic lines together is a...
  11. tjcoogan

    Ripper

    Do tell, who makes it? where did you get it? and how much did it cost?
  12. tjcoogan

    Dozer Blades on Skidsteers?

    Can anyone tell me who actually manufactures the Caterpillar 6 way dozed blade for skid steers?
  13. tjcoogan

    Cat to the Mat

    A little more info for you eclm1004. The fuel tank water and sediment drain plug is under the rear left bumper area, make sure the tank is almost empty and the fuel cap is off prior to opening the drain plug (for obvious reasons). More details are located here on pages 135 - 138.
  14. tjcoogan

    Cat to the Mat

    Hi eclm1004 welcome to the forum. I'm struggling a little trying to understand what you are saying/asking. I am assuming you are referring to when the fuel tank gets below half it stalls. Have you replaced the inline fuel filter and the fuel system primary filter (water separator) recommended...
  15. tjcoogan

    Cat 279c Electrical Schematic?

  16. tjcoogan

    Cat 279c Electrical Schematic?

    My 257 owners manual has a diagram showing which wire number on the Deutsch plug corresponds to which control button, I don't have it handy today but can scan the page and PM you if that would help.
  17. tjcoogan

    some work pictures

    An awesomely entertaining, thread superb work TomV
  18. tjcoogan

    Track Tearing Problem

    I nanna my 257B3 around and I hope it holds up over time
  19. tjcoogan

    What Attachments Do You Use?

    Thanks for the reply, my local Cat dealer says they supply some Cat rake parts to Harley owners so maybe you are right!
  20. tjcoogan

    What Attachments Do You Use?

    Hi i'm new to this forum so forgive me hijacking this thread to ask a question. Is there a difference in operating outcomes between the Harley Power Rake and the Caterpillar Power Box Rake? (for skid steer & track loaders) I have looked at the specs for each and they seem to be almost the...
Top