• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. J

    D7E-48A won’t start

    Yes we removed and charged the batteries it seems to crank over good. There is some smoke while cranking. We used some either on it with no result.
  2. J

    D7E-48A won’t start

    Having some issues with a D7E that won’t start. It just died one day and wouldn’t restart. We found the governor shaft broke the ears at the injection pump. So we removed the governor and changed the shaft. Reinstalled lining up the timing marks and injection pump can only go one one way. Now we...
  3. J

    Deere 6140D no start once hot with fault 002000.09

    Serial number is 1P06140DTDM050341*. I load tested the power and grounds with a load pro on my multi meter. Tested CAN wired wires by checking there voltage. Tested to see if terminators where good got 60 ohms so both terminators are good. Then checked wire continuity from diagnostic plug to...
  4. J

    Deere 6140D no start once hot with fault 002000.09

    Hi just wondering if anyone has seen this issue I have a Deere 6140D that starts and runs fine but if shut off after it gets hot tractor won’t start and has fault 002000.09 for ecu message missing. Checked power and grounds to ecu everything was good. CAN wirings are good as well. Sent ecu away...
  5. J

    Komatsu D61PX-12 Won't move Low Trans Pressure

    Hi just wondering if someone can help me out. The dozer won't move and has low trans pressure I drained the oil removed the suction strainer and found pieces of nylon rings. I believe the rings are probably from a clutch piston. What is is like to removed trans and disassemble on these dozers.
Top