• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. W

    Plastic pete

    Google is your friend Google (Case Backhoe Parts) about 586,000 results in 0.69 seconds
  2. W

    Case 580 rear wheel specs/ tire chain dilemma

    I bought these for my 580c http://spokane.craigslist.org/grd/4759997724.html
  3. W

    What's the best "older" Bobcat to buy?

    I purchased a 743 this summer 3500 hrs, no leaks, aux hydraulics, everything works but the horn. Bought it for home use I think I start it about two or three times a week to move something push something or haul something. It came with forks and a bucket for 5k. Yes, its getting pretty old but...
  4. W

    Transaxle question

    Hi Guys I have a 1986 case 580 super E 4x4 and am looking to replace the transaxle in it. Does anyone know if a two wheel drive will interchange with the four wheel drive unit. In the parts book it shows the same part # for both four wheel drive and two wheel drive. It is a later model with wet...
  5. W

    John Deere 1010

    1010 jd I own a 1964 1010 diesel. it has served me well. Parts are available but from Ma Deere expect to pay. Power is good and it always starts using the glow plugs even at 0 degree temps. These must use glow plugs even when warm. Never starting fluid. They aren't huge so remember what their...
  6. W

    207 starter vs 6.9L starter

    I have a 580c that just clicked when the button was pushed. I could jump the solenoid with 12 volts from the starter solenoid battery connection and it would start every time. I installed a relay by the starter and hooked up 12 volt supply from the starter to the relay than ran the wire from the...
  7. W

    Your dozer photos

    here's mine lol its almost big enough to be a dozer 1964 John Deere 1010
  8. W

    580 C 1978/79 Shuttle Problems ???

    It has a splined shaft and is held in place by the nut and washer.
  9. W

    580 C 1978/79 Shuttle Problems ???

    Sent p.m.
  10. W

    580 C 1978/79 Shuttle Problems ???

    leave it together and just take the four bolts that hold it to the floor. did you have the transmission in gear and the shuttle in gear when you had the backhoe lifted off the ground?
  11. W

    580 C 1978/79 Shuttle Problems ???

    you said your driveshaft is turning coming out of the power shuttle and going into your transmission when the tires were off the ground. So if you have power going into the transmission but your wheels are not turning when the transmission and the power shuttle are in gear i would suspect...
  12. W

    580 C 1978/79 Shuttle Problems ???

    I would pop out the floor pan and remove the top of the tranny and see what has gone away in your transmission.
  13. W

    What kind of stuiped things have you done with your backhoe.....

    I actually loaned mine out to a friend..... only once!!!!
  14. W

    Best Footwear

    +++ 1
  15. W

    Anyone with a 580c can you take a picture of your dash?

    Go to the Case web site and look at the online parts manual it has pretty good detail of where you diff lock parts are supposed to be.
  16. W

    Anyone with a 580c can you take a picture of your dash?

    The lever should be a diff lock.
  17. W

    Case 580c Construction King - Hesitating and jumping into gear

    Are you checking the right fluid? It would not matter if your hydraulics were at rest or not as far as the level of your transmission fluid level. The hydraulics for the loader and backhoe are separate from the transmission. Are you checking on the dipstick on the right hand side in the engine...
  18. W

    Carco winch

    Carco winch Model #E30SG Serial # 2281 control cables and log arch $1850 Scott
  19. W

    TD7G Winch Question

    Sent you a message Scott
  20. W

    How to determine the serial number on a john deere 1010 with no , or hidden tags

    Check out this site lots of great info http://www.jdcrawlers.com I have a JD1010 and there is a tag on the engine. If the tag is gone it is kinda hard to know the serial number. A lot of times the tag comes off during a rebuild and isn't put back on. The serial number isnt anywhere else on...
Top