• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. Reel hip

    M11 Cummins

    I had good luck with mine. It was a 96 330 HP and climbed hills ok with a load. But it was dependable.
  2. Reel hip

    Dump bed concerns

    Load it even. Don't put all your weight just in the back!
  3. Reel hip

    Who makes these mobile crushers?

    Good call Cmark.
  4. Reel hip

    Bobcat ACS Hydraulic lock up

    In a case like this I say first check the plug on the wiring harness. Unplug and then plug it back in and see if it doesn't go away.
  5. Reel hip

    POWERSCREEN TRAKPACTOR 320 Q's

    I have a buddy looking at one to buy. Anyone out there have any knowledge or experience with them. How do they hold up? Hw will mostly be doing concrete demo and crushing it up as base. We have a ton of regulations in California and more imprtantly more eyes on watching to make sure it all...
  6. Reel hip

    What a waste

    Including your wife. LOL Sorry I had to say that.
  7. Reel hip

    Peterbilt 379 Project

    The truck sure looks nice! A lot of time and $ invested. Best of luck. ps If this truck will be a show truck will you trailer it to avoid CARB?
  8. Reel hip

    863 hydraulic info needed

    The capped lines in back go to hydraulic stabilizers (dealer option). Have you hooked up a attachment to see if it powers it? You have worked on the control valve and changed filter (hopefully) Have you ran the hydro switch and trigger. It may be an electrical issue if you have full auxiliary...
  9. Reel hip

    Can you identify these two items?

    2nd one a tri pod of some sort?
  10. Reel hip

    Rolloff vs hooklift truck

    Old Doug I would like to build a way to switch beds on my f600 from a flat bed with sides to a longer bed that would touch the ground to have some thing winch up on or to a bed to pull a trailer. I plan on building it my self would a hook bed be better than a rolloff? I built mine with a ram...
  11. Reel hip

    Digging under fiber optic and electric

    Sound advice from above. My only other suggestion is to make sure the "upper superintendents" know this issue.Make sure you have other eyes on the line as your digging. Sometimes I expect the line to be here when from the operators seat the bucket is closer to contact. As above "don't hit...
  12. Reel hip

    Expenses of Owning/Operating- Water Truck (Construction Sites)

    Keep in mind California has HEAVY REGULATIONS on all trucks. They are broken down by GVWR in the door jamb from the manufacture. Either over 26,000 or under 26,000 GVWR. Look into the year of the motor in the truck. Someone may be selling you a headache. Older water trucks can take a mileage...
  13. Reel hip

    Do you need a license to run a bobcat or similar machine?

    I was an OSHA trainer in California. No license requirement , however depending on project developers they required training and certs to prove it. It helped with the bottom line of insurance and accident prevention. It was a very basic training with a test to prove completion. I find it hard to...
  14. Reel hip

    M11 won't start any ideas?.......

    Were you able to solve your problem? My M11 (1996) starts hard but once it warms up is good for the whole day. Doug
  15. Reel hip

    Rolloff vs hooklift truck

    Thanks, That's why I posted. I wasn't sure of a hook lift. The design seemed solid though. An added plus was no cables to replace.
  16. Reel hip

    Rolloff vs hooklift truck

    I only owned 1 roll off for about 10 years. The hook lifts were not even around when I built mine. I used mine to haul my bobcat to jobsites and then used as a dump truck while on the job. The one thing I know with roll offs is you can control the lift angle of the bin. I'm not totally sure if a...
  17. Reel hip

    My pride and joy Pete 379 Stolen with lowboy

    So glad she came back to you!!!! Great idea about the aux battery. So many times lowlife dead beat scum get off with just a slap. I think the sheriffs spent more time trying to get a better case. I hate thief's and some day he will get what he deserves, hopefully it will be in prison with a guy...
  18. Reel hip

    If you had to choose one machine for a landscaping business, what would it be?

    I was sub ed out by many landscape contractors with my bobcat. I started with a 743 and a backhoe attachment. How about the target area you will be focusing on. I'm sure if you are starting out you will take what ever comes your way, but if larger yards are common then a compact machine may...
  19. Reel hip

    Heading to liebherr factory in Telfs Austria!!

    Steve I came to this discussion too late. I have heard they were going to start sales in California. I have not had anyone tell me their machines were nothing but built solid. I am looking for them to hit it big here in Ca. Their website is pretty impressive! Doug
  20. Reel hip

    No start

    Start where Willie says ...he knows his chit!
Top