• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. D

    Tcd 2.9 deutz motor fuel problems

    I show a low fuel pressure. Any chance I could get a d2.9 manual so I can diagnose it?
  2. D

    Issues with Kawasaki 70ZV Loader

    Having some issues with my Kawasaki 70zv loader. Won't go into 3rd or 4th gear. When I do automatic transmission, it goes from 2nd and tries to go into 3rd but then slows down and goes back to 2nd. Any thoughts? Also, does anyone know where the communication port for the engine is on this...
  3. D

    Kawasaki 80z 3

    Any chance I could see a picture of the controller that you reset? I have a 70zv and am having that same issue.
  4. D

    Case 580SN Warning light??

    Can anyone help me with what this warning light is? Anyone know how to fix it? Its on a 2012 Case 580 Super N. Thanks for any help!
  5. D

    299D3 Errors

    I have been working on a skid steer that was completely burned out. I've replaced almost all the wiring and engine. I have it almost complete, but am getting a couple error messages. It seems to be keeping me from getting my starter, fuel level sensor, fuel/water sensor to get power amongst...
  6. D

    299D3 Help!

    I have a 299D3 with serial number CAT0299DLDY900853. We have a brown wire that goes to the back that looks like it should go to ground, but we can't figure out where it goes to and what it connects. I have attached the picture of the wire. Does anyone have an electrical schematic that may help...
  7. D

    299D XHP Help!!

    Unfortunately, you have to buy the whole valve, but the good news is that it was only $72. Which is cheap for Cat standards!
  8. D

    299D XHP Help!!

    Thanks Nige! Found out it was a bad solenoid. The electrical schematic did the trick of finding it, then the troubleshooting found it was a bad coil! Thanks!
  9. D

    299D XHP Help!!

    Thanks Nige! I'll check it out! I'll let you know what I find out. I appreciate it!
  10. D

    299D XHP Help!!

    I have a 2013 299D XHP compact track loader with an error code. The serial number is CAT0299DHJST00401 and the error is 358-5. It says "Implement Pilot Pressure Supply Solenoid Current Below Normal". I've attached both pictures below. Anybody know how to fix this? What should the ohms be on the...
  11. D

    Help! Cat 246D LH Joystick

    Right speed sensor. Had a break in the line. Cat came and spliced it. Easy fix that caused a major headache!
  12. D

    Help! Cat 246D LH Joystick

    Good point. I'll give Cat a call and have them come out.
  13. D

    Help! Cat 246D LH Joystick

    The only thing I can think of is that when we took the engine out, with the hydraulic pump, it must have messed with the speed sensor. Making one of them not work as well or short. As you drive the skid steer its not as smooth as it probably should be and is at times abrupt. They are $65 a piece...
  14. D

    Help! Cat 246D LH Joystick

    Yes. From what I can recall. We bought this with a blown engine. Do I need to put the old computer back in and program the ecu with the new injectors?
  15. D

    Help! Cat 246D LH Joystick

    Do you think it would have anything to do with the speed sensor? We changed the engine out of this machine and put a new one in it.
  16. D

    Help! Cat 246D LH Joystick

    No luck. The ground that was on the alternator was fine. Somehow, I need Cat to come run their scanner on it. Dang!
  17. D

    Help! Cat 246D LH Joystick

    You're right. Its definitely not the travel alarm. Its coming from inside the cab. I found the travel alarm and it is in the back of the skid steer. I'm working on the alternator right now. It has a little ground that was connected to it. If I'm looking at the electrical schematic for it, it...
  18. D

    Help! Cat 246D LH Joystick

    Nige, Do you have an electrical schematic for this machine. I'm thinking I have a bad ground by the alternator. I had a couple wires hanging around after I switched out the fuel pump and alternator. I thought I put them all back where they were supposed to go, but this may be the reason. Thanks...
  19. D

    Help! Cat 246D LH Joystick

    I'll take a look at that. I never thought of that. I called Cat to have them come to my shop and use their ET. They said they would get back to me with a time and then never called back. Kind of frustrating. But if that fixes it, that would be amazing!
  20. D

    Help! Cat 246D LH Joystick

    Thank you! I will do that!
Top