• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. A

    JCB 718 front suspension

    Hey guys, we just acquired a late model JCB 718 ADT and the front suspension is not working. Was wondering if anyone had any experience with these trucks and could point me in the right direction. Serial number is 1304612. Also looking for a good source on some odd and ends parts, front wiper...
  2. A

    Sourcing parts for BOMAG BW211D-3 other than dealer

    I’m currently looking for a couple odds and ends for my Bomag BW211D3 with a Deutz diesel. Specifically a couple hoses on the engine itself.
  3. A

    Kobelco sk80cs muffler

    does anyone have any good leads for a new replacement muffler for an 80cs? Dealer wants $950. I know I haven’t had good luck with aftermarket mufflers, - not lasting very long due to thinner material. I have found one for about $250 but wanted to see what my other options were if any. Thanks in...
  4. A

    Wtd: asv RC 30 quick attach

    Im looking for the machine side quick attach in good shape to adapt another machine (older gehl) to utilize the rc30 attachments. If someone has one they’re parting out or know where there is something reasonably priced let me know. I’m located in northeastern Ohio. Thanks in advance! Picture...
  5. A

    Hydraulic thumb lock

    looking to purchase and or fabricate a lock for my hydraulic thumb to eliminate drift down. Looking for ideas, I like the patented lock rockland uses on their stick mounted thumbs and wondered if it would be possible to purchase that mechanism and fabricate onto my stick and thumb because I like...
  6. A

    Any specs on a rockram 778LH

    lookkng for some specs for a rockram 778LH. I’ve seen one for 120/140 size, also seen one with a mounting plate for 80 size. Curious as to the weight class and such on this hammer. Thanks.
  7. A

    Kobelco sk80cs auxiliary hydraulics

    i have an kobelco sk80 with auxiliary hydraulics. We currently run a hydraulic thumb off of it hard plumbed into the factory shutoff (no quick coupler fittings). I’m looking to others to see how they have ran another line, or a 1 into 2 valve so I don’t have to unhook the thumb when I want to...
  8. A

    Heater for Deere 650H

    i have an open rops 650h deere dozer looking to put a heater on it for a little more comfort when using in the winter months. I do have a soft cab for it which is a tremendous help keeping wind off of the operator. If I recall correctly when checked on a factory oem unit that fits under the seat...
  9. A

    Tara systems on board scales

    anyone have any experience with Tara systems scales? And has anyone installed them on a John Deere wheel loader? Curious as to where they have tapped into the hydraulics.
  10. A

    Asv rc30 terex pt30 adapter plate

    Looking for info on an adapter plate for asv/terex pt 30 adapter plate to run full size attachments. Thanks.
  11. A

    Bobcat/melroe hydraulic breaker specs

    I know it's an older unit and was wondering if anyone could shed any light or give some specs on a melroe 25006 breaker/hammer. If parts are still available and any break downs or manuals for it also. Thanks in advance.
  12. A

    Tracks on case 1825B

    Contemplating purchasing an 1825B with low hours for occasional commercial use (where big machine cannot fit in) and around the farm. Question is if it's possible to put a set of over the tire tracks on machine. It has a set of solid 8.15-15 tires on it now but could change/swap out for a...
  13. A

    Deere 244E loader trans

    I have a john Deere 244E wheel loader that when machine reaches operating temperature the transmission looses power and starts to slip. Seems to do both in high and low speed. Just curious as to if anyone has had same problem in a similar machine and what it may be and or cost to fix.
  14. A

    Kobelco heater display issue

    Hopefully this is an easy fix for someone who knows more than I do on the subject. I replaced the batteries in my kobelco 80cs and now the display on the heater temperature is (18.0, 19.0, etc) before it was in degrees Fahrenheit. My question is how to get the display back to reading in...
  15. A

    tracks for a kobelco sk80

    Looking for some input on replacement tracks for a kobelco sk80cs. I would prefer the stock or original oem tread but can't seem to find any. Wondered what you fellow guys with 80s are using. My tracks were still in pretty good shape until one got cut deeply. Another route I can go is with...
  16. A

    Wtb: kobelco sk80cs track

    Looking to purchase a good used rubber track with oem tread for my kobelco sk80cs excavator. Thank you.
  17. A

    Cat 277 main case drain filter???

    Just had a drive motor Repaired on our '01 277 mtl and was told to change out the main case drain filter (and hydraulic oil) due to contamination from the faulty hydraulic drive motor. This is said to be different from the hydraulic spin on cartridge filter. does anyone know what is being...
  18. A

    Cat 277 tracks

    I have a cat 277 mtl with rubber tracks. I've purchased new tracks individually one at a time and once again am in the market for one due to one coming Apart. I'm trying to locate a good used track to match the good one still on the machine. I was wondering if any one has something out there or...
  19. A

    Name that thumb

    I have a thumb on a U35 kubota mini excavator and am looking for something really similar to it for a kobelco sk80. Any help on finding out the manufacturer or this one or someone who could point me in the direction of somebody who makes a similar hydraulic thumb that is approximately stick...
  20. A

    Kobelco Sk80CS hydraulic thumb options

    hey guys, we're looking at getting a hydraulic thumb for our mid sized excavator. (SK80CS). I really like the rockland BT-H thumbs, but got a price from them, and was too over priced for me. I'm looking for something that folds up as tight as possible to the stick, for close quarter work...
Top