• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. B

    John Deere 410 Engine Rebuild HELP

    Thanks for all the replies, sorry I didn't see them sooner, some reason I didn't get any email updates??? It was a rod bearing that went out, it ruined the one connecting rod but all the other bearings look OK. Do you think I need to replace all the connecting rods? I was just going to replace...
  2. B

    John Deere 410 Engine Rebuild HELP

    I got the crankshaft hauled into a shot to get turned and it's to far gone. Loos like I can get a new one for around $500 bucks, one dealer quoted me $3200 for a new crankshaft hahahahaa I'm waiting for the crank to come so I can start reassembling Thanks everyone for the help
  3. B

    John Deere 410 Engine Rebuild HELP

    Yes, that's what was hanging me up, once I pulled that out the camshaft slid right out.
  4. B

    John Deere 410 Engine Rebuild HELP

    Yeah that's what I was figuring so I went back out to mess with it and it wasn't coming out. THEN I realized my stupid mistake :mad:. I never thought to pull the fuel pump :rolleyes::oops:. Pulled the fuel pump and the camshaft slid right out. I'll get the balancing shafts out tomorrow, then...
  5. B

    John Deere 410 Engine Rebuild HELP

    Thanks everyone for all the great info! I pulled out the lifters, got the camshaft unbolted and half way out. It seems like the camshaft is hanging up on something and I can't get it to go in our out? I'm trying to go easy so I don't bugger the camshaft lobes. I have all 8 lifters out so I...
  6. B

    John Deere 410 Engine Rebuild HELP

    Yes I am planning on replacing all the bearings, I'm basically taking it down to a empty block :( Thanks for the info
  7. B

    John Deere 410 Engine Rebuild HELP

    Here are a couple YouTube videos I did on my progress so far
  8. B

    John Deere 410 Engine Rebuild HELP

    OK, My '75 JD 410 backhoe started knocking, I had a bunch of metal flakes in the oil, I pulled the oil pan and I have a bad rod bearing. I pulled the engine and completely dissembled it and the crankshaft is needing to be milled. I now have the crankshaft loose but it won't come out cause I need...
  9. B

    Case 530 CK IT MOVES!!!!!

    Pictures
  10. B

    Case 530 CK IT MOVES!!!!!

    Well.... I found time to tare into my case 530 CK this weekend and I found out that the hydraulic pump that runs the clutch had a sheared off key in it. I replaced the key and got it back together and sure as shooten it moves. All I got to do is bleed out the hydraulics in the loader and I am...
  11. B

    Case 530CK will not move?

    Thanks for the info
  12. B

    Case 530CK will not move?

    I have a case 530CK that will not move, I started to take off the plate on top of the clutch housing when I found this (look at pictures) it looks like there should be a second lever on the right side of the steering wheel but it was cut off before I got the tractor. Does any one know what this...
  13. B

    Allis Chalmers Reversed Tractor with loader (Pictures)

    I know Allis Chalmers made a forklift that looked like a reversed WD45, there is one in a nearby town.
  14. B

    Allis Chalmers Reversed Tractor with loader (Pictures)

    It is a lot more stable then it looks, it is 7 1/2' wide and I could widen the steering axle some more. I was going to replace the drive wheels with combine wheels but with the loader on it they don't fit, I am never on any inclines or slopes, I have a Case Industrial with loader and I use it...
  15. B

    Allis Chalmers Reversed Tractor with loader (Pictures)

    It has a added hydraulic pump on the rear that runs the loader and the steering. I need to put in a regulator for the steering because it is running at the same presser as the loader and if I steer to sharp I blow out the seals in the steering valve. I am going to send it in to farm show I but...
  16. B

    Allis Chalmers Reversed Tractor with loader (Pictures)

    I am planing on building a crash cab for it but I haven't had the time or metal to do it yet, I would like to build one were I could enclose it for the winter for moving snow. I am also thinking about putting a seat belt in it so the operator can't be thrown out. I have thought about sending it...
  17. B

    Allis Chalmers Reversed Tractor with loader (Pictures)

    I am not sure if this is the right place to post this, so if this is the wrong area I apologize. This is my Allis Chalmers WD45 that has been reversed and has a Farmhand F11 loader on it. This is a very handy machine, the steering axle is out of a International 915 combine and it has the...
  18. B

    Case 530 CK Diesel

    Thank you so much for all the help, you must have lots of experience with these tractors. I will start this weekend and I will see were I end up. Thanks again, Coyote Green
  19. B

    Case 530 CK Diesel

    were would the intake screen be located? When the tractor is running I can push down the clutch and it feels like there is no oil? I will check the pressure and then check the screen. Thanks for your time. Coyote
  20. B

    Case 530 CK Diesel

    Pictures
Top