• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. dhutch

    International 175C information

    Just noticed my post, should have read center pedal, not steer pedal. I show adjustments for it in my manual along with parts manual diagram. Definitely easier on the Trans to decel before shifting.
  2. dhutch

    Volvo D6E engine manual wanted

    Yes it did. Its aggravating to set the clearance on.
  3. dhutch

    Volvo D6E engine manual wanted

    Yes, the head gasket was leaking at the #4 and #6 cylinders. I was able to get a complete head gasket set and the manual for the engine. What I figured out is this is a Deutz TCD2012 engine. Using that manual and some information out of the volvo D6D engine manual, it was fairly straight forward...
  4. dhutch

    International 175C information

    The steer pedal works the throttle shaft by an adjustable bolt just under the fllor plate. When you partially push the pedal, it decels, further engages the brake. You may need to unhook the brake rod to see what's froze up. It's not that bad f a job, a loader has a little less room to work...
  5. dhutch

    Volvo EC210Cl overheating

    Quick update on my overheating issue, after having a hyd oil cooler fail and getting it fixed, I cleaned out the radiator for better air flow, but that didn't help. I purchased the SLP head kit and replaced the head gasket. Cylinders #4 adn #6 were allowing compression into the coolant, blowing...
  6. dhutch

    Deere 160C wiring harness repair, I figured out a source for connectors if anyone needs help

    PM me with what connector your looking for
  7. dhutch

    Volvo D6E engine manual wanted

    The sensor is located in the head on the hydraulic pump end. I've considered running an external hose from there back to the pump to help circulate coolant. This was a mod that caterpillar had done to some of their earlier 3406A engines due to poor circulation.
  8. dhutch

    Volvo D6E engine manual wanted

    That's what I'm trying to figure out as well. I just picked up a new belt to replace the worn one that's on it now. Im thinking circulation issue. I'm also replacing some of the hoses.
  9. dhutch

    Volvo D6E engine manual wanted

    Thank you. I've had that PWM apart and cleaned it up, which got the fan working as it should. It was caked in mud and not making good electrical contact.
  10. dhutch

    Volvo D6E engine manual wanted

    Thank you
  11. dhutch

    Volvo D6E engine manual wanted

    Thanks for the post, I've been busy but I'll look over the information this afternoon. Regarding something not being right, I ran the machine 7 hrs this week on a job. The next day go to start it and track 200 yards and it overheats. It's as if something is blocking a cooling passage. I've...
  12. dhutch

    Volvo D6E engine manual wanted

    Looking for the cooling system info, water pump/thermostat install information, radiator removal information would be a plus. Somethings not right on the cooling system and I want to verify some things. I checked the orientation of the water pump and it appears right. Thanks for the response.
  13. dhutch

    Volvo D6E engine manual wanted

    Looking for an engine manual for my Volvo EC210CL with the D6E engine.
  14. dhutch

    Volvo EC210Cl bucket curl issue

    I finally got a chance to work on the 210. I didn't have much time so decided to look at the bucket curl circuit first. Attached is a picture of the metal I found inside the spool valve. Some of the edges of the valve were a little rough, so I polished this with some oil coated 2500 grit...
  15. dhutch

    Volvo EC210Cl bucket curl issue

    Uffex, Thank you for the information you provided, and the response. I purchased this machine from auction in December. When I loaded/unloaded it I had a hydraulic fail code. I swapped out the car fog light relays for original type, correctly rated, relays. I also found the P1 sensor, on the...
  16. dhutch

    Volvo EC210Cl bucket curl issue

    I made up a spread sheet to start tracking what I've done and to note pressures, etc. Here's what I have so far. The pump pressures were check while moving arm out/boom up simultaneously. Everything else was check at the end of the stroke and held while trying to get an average number. Bucket...
  17. dhutch

    Volvo EC210Cl bucket curl issue

    Good day, thanks for the info on which pump does what. My thinking was #2 providing pressure to the bucket circuit was how the system worked, but I was unsure when I was getting pressure only from #1 when moving the bucket. But then I realized I was measuring pressure from the wrong place, the...
  18. dhutch

    Volvo EC210Cl bucket curl issue

    Got bored, so I pulled the regulator off the #2 pump and went through it. The sliding sleeve and the spool were a little varnished. I worked them back and forth with clean oil and they work freely. Nothing else looked out of the ordinary. Reinstalled, bled pump and hooked gauge up to the correct...
  19. dhutch

    Volvo EC210Cl bucket curl issue

    Just noticed that I put relief valve and I meant the pressure regulator on the side of the pump.
  20. dhutch

    Volvo EC210Cl bucket curl issue

    Finally got a chance to check the main pumps and servo pump. The servo pump was at 510 psi, I adjusted it up to 560 per the book. I switched the bucket curl and bucket dump PRV's and that seems to have fixed my bucket curl issue. I pulled the Travel Right spool out to check it, but didnt find...
Top