• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. R

    JCB SRS nitrogen cylinders

    Anyone have details on how to check the nitrogen charge in the long cylinders located underneath the lift cylinders?
  2. R

    D6D 20X - engine shut down

    I must confess that I didn't index that spring. Thanks., I will for sure take a look on my next visit
  3. R

    D6D 20X - engine shut down

    All the insides of the pump are working fine now......I am working my way outwards. It starts up handsome, sounds nice. Just gotta get the revs right
  4. R

    D6D 20X - engine shut down

    Yes, it might come to that. I have made progress from the last time we spoke. It fires up nicely now......I was quite chuffed with that.......just this last bit on the speed settings is annoying. Anyway i got your number
  5. R

    Daewoo Solar 140LC-V ('06) starting fault

    Many thanks for that! Much appreciated
  6. R

    D6D 20X - engine shut down

    I am doing a D6D for someone, the sleeve-meter pump has had some issues which i seem to have got to the bottom of now except.....the low-idle and shut-down positions of the throttle linkage don't seem to work correctly. The machine had a hard, neglected previous life and when it came to the...
  7. R

    Daewoo Solar 140LC-V ('06) starting fault

    Anyone have any knowledge of the starting circuit for this machine? The symptoms are as follows 1/ Batteries all good, power comes to a big solenoid right there in front of the batteries which is "open". No onwards power. 2/ Short the solenoid over, but key switch will still not start the...
  8. R

    Earthing a Genset/Welder

    Thank you everyone who has contributed to this thread. it is much appreciated!
  9. R

    Bell B30D

    thanks for the reply Nige
  10. R

    Earthing a Genset/Welder

    Am I supposed to have an earthing strap between the body/casing of a Genset/Welder when using if its on rubber tyres?
  11. R

    Bell B30D

    also the a/c doesn't work. I don't see a fuse in the overhead board, just a relay. It doesn't click which switched on and off. Anyone have a wiring diagram of the HVAC system?
  12. R

    Bell B30D

    I've been using one of these lately and noticed when in either 1st or 2nd it seems to select 1/2 gears - in other words like 1st low or 1st high......same in 2nd. Is that feature? I thought it was just a straight ZF 6 speed box. Anyone have the full menu details that can be seen/adjusted in the...
  13. R

    Cat d4d growling

    my D4D also growls in bottom gear when pushing hard, its deffo not slipping and it stops if you pull a steering lever........it sounds like something is tight inside.....but anyway gonna let the fault develop
  14. R

    Bell A30D

    How big a job is it to change the pinion shaft seal on the rear axle?...is it as simple as it seems?.....pull off the drive shaft, pry out the seal and then drive a new one in? Any clues where the fuse for the cab HVAC system lives?.....its not in the roof with the rest of the fuses Is there a...
  15. R

    Caterpillar Sproket Removal (also Komatsu)

    what you been up to lately Tony?.....summertime, no rain to labour thru......ideal for ripping out final drives
  16. R

    Russian Caterpillar's

    Part of the new extended Russian Federation ;-) How's business these days? I was in Moscow up until Dec '14, just as the ruble crisis hit.......
  17. R

    Russian Caterpillar's

    Dobri den KMM, which part of the old CCCP do you live and work in?
  18. R

    some work pictures by BuMach

    BuMach, Fascinating stuff, keep posting! :)
  19. R

    European wagon identification

    not sure.....but if you facebook Joachim Jensen it will find the owner.....you could then ask direct
  20. R

    A new High Drive dozer maker!

    classic :-)))))
Top