• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. S

    Landini Globus 60

    Hi can anybody please tell me what model Perkins engine is used in a Landini Globus 60
  2. S

    Cat flash files

    y6u can buy sis but it wont be at a dealer level there will be things you wont have access too.also not all flashes are free. you will also need to copy and save current software before installing any updated software. if you dont and have issues downloading you will be DEAD in the water!!!! beware
  3. S

    Case 580 super M

    check to see if the cylinder rods or rods are straight or if it is binding.....if that's not the case you could put a orifice in both the hoses that make the bucket curl back. This will slow it down and smooth it up
  4. S

    injector copper sleeve

    Hello im working on a 880/5 dt Fiat farm tractor. I need to install a copper insert into the injector tube....no not the copper sealing washer that goes on the injector. the tube needs to be swaged once installed. I've taken this to one engine shop and one machine shop no one wants to do it...
  5. S

    Cat 424D hydraulic & transmition issues

    slippers on the bottom of the pistons also look contaminants did a number on them too!
  6. S

    Cat 424D hydraulic & transmition issues

    yes that's what I was meaning not sure the cost of a SOS sample these days but they used to be very reasonable and a valuable tool for diagnostics. it will tell you particle counts on various metals and dirt in your system. check the price you may be pleasantly surprised!! just remember the...
  7. S

    Cat 424D hydraulic & transmition issues

    from those port plate pics it sure looks like damage from contamination .suggest performing a sos sample and taking in into your Cat dealer
  8. S

    Cat 226

    may not be the sis way but believe me I have yanked out my share of Cat and other skid steer engines!
  9. S

    GM 6.2l diesel Al radiator replacement

    yes its good stuff and like you say buy the concentrate......why pay for water!
  10. S

    Cat 226

    there's no easy way I've tried them all .its just plain ugly! From a time perspective this may suit you...its faster. first remove the cooler/rad assembly This will give you way more room air cleaner housing has to come off .remove various wires etc inc the battery. remove exhaust and flex pipe...
  11. S

    Sprocket ware

    if you can replace it and get out+ replace the broken bolts .but if you cant do it at this time watch the track tension and operate with some care it will likely run a bit longer
  12. S

    Cat 226

    did the engine knock? think your going to be pulling that engine. typically a bent rod will not reach TDC and will cause a misfire. there are some pretty good aftermarket complete rebuild kits out there. with every thing you need you wont get a connecting rod though.I used one of these kits...
  13. S

    Cat 226

    my money is on a blown head gasket
  14. S

    Sprocket ware

    sprocket is toast!
  15. S

    iveco 2.9 diesel 3cy engine

    its back together now and running well loading manure!
  16. S

    Cat 226

    you have a problem! pull your cylinder head
  17. S

    iveco 2.9 diesel 3cy engine

    so heres some pics went down last night and put it on you will note the keyway lines up with a reciprocating mark. the engine is at tdc. did take a good look under the pump foe a screw plug or pin none visible.
  18. S

    2005 CAT 305CR adding flail mower and intro

    hope it works out well for you!
  19. S

    iveco 2.9 diesel 3cy engine

    will let you know for sure!
  20. S

    Cat 226

    now do your compression test. if you sacrifice a glow plug you can modify it to hook to a gauge 0-500 or a 0-400psi would likely suffice. if you have a test light hook the ground to positive + now with the bridge bar between the glow plugs removed, touch the tester tip onto the threaded portion...
Top