• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. 5

    Case 580K Brakes Sticking

    Thanks for the ideas guys! Unfortunately, I still have a problem. This is what I did. I checked all the linkage and springs and everything seems to move and operate fine. I loosened both of the nuts on the top of the cylinders above the transaxle about a 1/2 inch. I pulled the pin out of...
  2. 5

    Case 580K Brakes Sticking

    Hello All, I have a 89 case 580k and all of a sudden, I have brake issues. Last year I adjusted the brakes using the cylinders on top of the transaxle so that each peddle had about 1.5-2"" of play at the top. Everything seemed to be fine and I probably put about 100 hours on it before winter...
  3. 5

    Case 580k Bull Gear Final Drive Repair

    Thanks for the reply Alrman, So I kept the shims on the same sides as they originally were. There was .040" on the left and .050" on the right. Same goes for the thrust washers. Never measured them but kept them on the same sides. I did not replace any bearings. I inspected them well...
  4. 5

    Case 580k Bull Gear Final Drive Repair

    Hello All, I have a case 580k backhoe. I just replaced both final drive gears. (1 was broke and the other had cracks) Took everything apart kept everything clean reassembled the transaxle and now have an issue. It appears 1 of the drive gears is very tight to the bull gear. As I slowly...
Top