• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. Bubba

    Bobcat T320 Fuel Sending Unit

    Can anybody send pictures or tell me where the fuel tank sending unit is in my T320. I think it’s down in the hole between the engine and hydro pump. Unable to find it. Best way to get to it and remove it and replace. Thanks
  2. Bubba

    Bobcat T320 Cooling Fan

    I have a hydraulic fan, cleaned all radiators. Not sue how to check the fan to see if it is set at a higher speed when it gt hot operating. As soon as it get hot i let it idle and it cools down within a few finutes
  3. Bubba

    Bobcat T320 Cooling Fan

    My Bobcat T320 heats up after 30 minutes operating. I can let it sit at full throttle and it starts to cool down. I dont hear the Hydraulic fan kick in and it makes me think that the fan is not turning fast enough to cool the hydraulics. I read that it has a porportial Valve. Can anybody...
  4. Bubba

    Bobcat T320 steel tracks

    Anybody got any issues with a Bobcat T320 with steel Tracks
  5. Bubba

    T300 Bobcat tilt /lift light flashing

    Well we got it figured out. Replaced the coil on control valve. It has 3 coils, the one in the middle. Two on each side deals with aux. the lift / Tilt is in the middle. Code was 17-06 , unplug it then start machine if you get 17-07 it’s a bad coil. Cost for part $65.00.
  6. Bubba

    T300 Bobcat tilt /lift light flashing

    I got a Bobcat T300 serial # 532012017; the Tilt/ Lift light started flashing which is the 3rd light from left on left side of instrument panel. I raised the seat bar thinking it may have lost connection which triggered the fault. Lowered seat bar aggressively thinking it may was not making...
  7. Bubba

    CAT CB224E Roller

    Thanks Nige, I appreciate your help and quick response. Merry Christmas.0
  8. Bubba

    Ingersol Rand DD22 Parts

    I got a IR DD22 roller that I have thrown a rod in. I either need to sell the machine for Parts, Junk it, or get an engine. Everything operated OK for a old machine, until I ran it without oil in the engine. If anybody can use any of the parts let me know. or if you got an old IR roller that...
  9. Bubba

    CAT CB224E Roller

    What type Hydraulic Oil to Use in this Roller. Bought it used early this year and got a hydraulic leak. Not sure what kind of oil to run in it. Thanks
  10. Bubba

    FiatAllis 65B

    Thank You Turbo, I mention that to my mechanic. If he will listen to me. I let you if it works an if not I tell how we done it.
  11. Bubba

    FiatAllis 65B

    I got a 65 B and needing to do a Brake Job on it. I can't get the Hubs off, tried Heating and put a 10 Ton Porta Power with a 20 ton Ram and they still want budge. Made a puller and got some grade 8 1 inch bolt to screw into the two holes for the puller. Run out to thing to try. Don't want...
  12. Bubba

    Fiat Allison 65B Brakes

    Thanks everybody for the good info. I will get some books.
  13. Bubba

    Fiat Allison 65B Brakes

    Can anyone share some information on repairing Brakes on a 65B Fiat Allison. Just purchased with no brakes. Pedal goes to floor. Added Brake Fluid with no results. Where to get parts. Somebody said New Holland services Fiat Allison now. Thanks
  14. Bubba

    Bobcat 337 - Starting Problem (Electrical)

    Correction. Kubota 2003 with turbo.
  15. Bubba

    Bobcat 337 - Starting Problem (Electrical)

    Thanks for the info Engine is a Kubota 2203. Machine serial no. 233312003 Bobcat 337 excavator. What solenoid are you referring to. Thanks for your time an help.
  16. Bubba

    tracks, which manufactures/brand names are better, what companies manufacture them?

    Nothing but Bridgestone.
  17. Bubba

    Bobcat 337 - Starting Problem (Electrical)

    Well thanks everybody for the help....
  18. Bubba

    Bobcat 337 - Starting Problem (Electrical)

    Hey Fellows, I need some help finding out the problem with Bobcat 337 not starting, it cranks. Just before I had to choke it down to shut off. Found out the linkage in the fuel cutoff solenoid had come out. The gauges will not lite up, I screwed the linkage back in the solenoid, still...
  19. Bubba

    Bobcat 337 Thumb

    Is there a problem putting a thumb off a E80 on a 337. It's about 17 inches wide. I know I am going to have to get pins from a E80 and maybe the have some bushing made, but I don't want to go to the expense and the thumb be to big for the boom in relations to the stick and bucket. What your...
  20. Bubba

    Need to buy a set of tracks for my 334 mini ex.

    The best track on the market is a Bridgestone, cost a little more but will last 3 time longer than the cheaper brands. The only other kind I would have is sold by tractor equipment company, TEC I do not know the name brand. Your Bobcat dealer can provide the Bridgestone. That my opinion.
Top