• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. R

    D6 R oil pan repair/replace

    our d6 r series II with a C-9 has had the oil plug repaired before we acquired it and it has always leaked alittle. Some say to replace that pan engine needs to be pulled, others say not. Anyone had a personal experience?
  2. R

    D6R mechanical temp gauge

    we want to put a mechanical temp gauge on our d6R ii with a c-9. Is there a port to put one?0
  3. R

    Screen/crushing bucket

    anyone out there used using any kind of screening bucket? We are bedding pipes in heavy clay and rather than bringing crushed stone in we would like to bed with processed clay, would clay clog up the screens, some buckets have star wheels. At times it's dry and hard and other times it's like...
  4. R

    D8t service password

    We want to change the settings for the reversing fan on our D8t but don't know the service password to get into those settings. Is there a standard password or a way to make a new one?
  5. R

    D8T screen went blue

    end of today the service screen on our d8t went dark blue, couldn't make out anything. When the master shuts off screen powers down same as any other day. All dash gauges still working, what should I check?
  6. R

    Door locks on cat D8t

    did cat have the option to not have door locks on a D8t, I looked inside the handle today and I swear there's nothing behind the keyhole
  7. R

    Volvo 160d code

    Had a code come up today we have not seen Code-MO2505-07 Source: E-ECU
  8. R

    D6R ii not starting good

    As it cools off this fall our d6 isn't starting good, 30s and cooler. Just had it serviced at cat, they say fuel system is good and pre heater is working. 7,000 hours, C-9. Could intake heater be tired? Runs good no loss of power when working
  9. R

    Nipple on cylinder

    We have a cylinder and the nipple for one of the hoses has a hairline crack and dripping, we are worried if we tighten the hose more going into it, it will open the crack more. Removing the whole cylinder to have a new nipple welded on it a rather larger under taking. Brazing hold up under...
  10. R

    Question for Nige

    Nige, I have read that D8Rs have a much larger torque converter than D8ns, but then I was told that it wasn't until series ii when the torque got bigger. Any info? Thanks
  11. R

    D8R vs D8R ii

    Pros and cons of the series one vs series two, one has less electronics but I hear two has much larger torque converter. Our application is long heavy pulls ripping
  12. R

    Bucket spoon

    Anyone have some pictures of spoon attachments for digging large diameter pipe? I know some people weld them right to the teeth but if we can build something to bolt up that would save some tooth locks I would think
  13. R

    Hydraulic vs pto winch

    What are some pros and cons of hydraulic winches and pto winches. Our application needs slow speed and variability of speed
  14. R

    Bucket spoon

    Anyone have pictures and steps for attaching a spoon on a excavator bucket without welding it too the teeth. Digging 15" pipe
  15. R

    D6r sprocket bolts

    What is the torque spec on the sprocket bolts on a d6r ii?
  16. R

    final drive leak when brought in from the cold

    we brought one of our dozers in the shop for winter time service, it had been outside all season. Anywheres from 10F degrees to 30F outside, in the heated shop overnight the left hand side final lost 3 gallons of 80-90. Never had a leak on it before, refilled it, been a day and has not lost...
  17. R

    2011 Volvo EC210

    We're going to look at a 2011 volvo ec210, anyone have any information they'd like to share. I have been told that Tier 4 engines have less issues than Tier 3. It has 1,000 hours. Think this one has a tier 3, we run a 2008 volvo now has 6800 hours now, been a very good machine.
  18. R

    Block heater for D6R series 2

    Does anyone know if cat has a block heater that can screw into the block on a d6R series 2? Also where on the block does is screw in?
  19. R

    d8k oil in finals from transmission

    going to look at a d8k that is getting oil in the finals from the transmission, we are told that not alot is leaking by at the moment. We have had Cat tell us that alot of guys dont repair the issue and run them. Letting oil out of the finals and putting more in the trany from time to time. 3...
  20. R

    D 8 k

    Any input on a d8K? We like the idea of available parts and the fact they are simpler to work on than new dozers that are all electronic.
Top