• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. A

    Kobelco / New Holland E130 / 135 Pump p2 Error Code

    Also yes, error code is SE. Just to be clear, i pulled the actual sensor out and swap sides, that narrows it down but im perplexed as to why the problem reappears with a new sensor unless they a reading a slightly different voltage. What was on the machine ls52s00015p1 Replacement was...
  2. A

    Kobelco / New Holland E130 / 135 Pump p2 Error Code

    The problem follows the sensor. I pulled the p2 sensor out and moved it to P1, now the problem is on p1. So got a new sensor in there today, machine was fine for 30 min now back to p1 sensor error. Its worth noting that both are china sensors, (correct part number) The p2 sensor was...
  3. A

    Kobelco / New Holland E130 / 135 Pump p2 Error Code

    Hello, been chasing down a problem on my 2007 new holland e130es. Been giving me a pump p2 error code combined with loss of power / bogging Wiring is fine, confirmed this by swapping the sensor wire from p1 to p2 and the problem stays with the sensor not the wire. Next step i will try...
  4. A

    New Holland / Kobelco E130SR Charge Error

    Will grab pics of the cab later but there are 3 buttons on both sticks with the lettering if there was any worn off, the workshop manual doesnt say much about them. We are gonna be doing a breaker attachment soon.
  5. A

    New Holland / Kobelco E130SR Charge Error

    Theres connection from the white red to alt, blue wire at the exciter at the alt is showing open, that makes a lot more sense now, so theres a break in that blue wire between the batt relay area and alt
  6. A

    New Holland / Kobelco E130SR Charge Error

    Gotcha, so its an input now that you mention it, according to the schematic the blue wire at the alt should be showing +24v
  7. A

    New Holland / Kobelco E130SR Charge Error

    I found the diagram. White / red wire from the controller, found it, no voltage when running. Assuming theres a bad cap or transistor on the board somewhere as this circuit does not trigger a relay it runs direct from the controller to the hour meter and alt. What i did in the mean time is...
  8. A

    New Holland / Kobelco E130SR Charge Error

    hello, I have a new holland e130sr the display is showing charge error, I have disvovered that the wire at the alternator that should show battery voltage with key on is reading no voltage. I have the workshop manual and that wire seems to connect direct to the ecu, also powers the hour meter...
Top