• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. D

    D6R XL Series III with C9

    I’m looking at a D6R XL to buy with a C9 in it and wanted to know if these engines had many problems with the HEUI pump and injectors in this application. Dozer has about 13k hours on it and I don’t have the history.
  2. D

    D4C Series III Electrical Schematic

    Would someone please post an electrical schematic for a D4C Series III SN 6YL2167? I have no power at the hour meter. I've had trouble with corroded wiring connectors on the alternator side, so I have a feeling that is also my trouble here. I need to rewire my backup alarm and lights as well.
  3. D

    D4C Series 3 steering problem

    I'm having trouble with my D4C Series 3 SN 6YL21xx. When I try to turn left, sometimes the right track will stop pulling. I've changed the cams, rollers, pins, and plungers(spools) in the valve bodies and adjusted the linkages according to the book but it's still not working right. It did work...
  4. D

    Swench 1500 for sale

    Captain Analyzer, People can't respond to posts in this section so you're going to have trouble finding a seller. Here's one for sale, not sure if you've seen it: http://buffalo.craigslist.org/tls/5200953845.html
  5. D

    Need performance data on D10T

    I've got some pits for the oil & gas 'bidness' to punch out. They're 500' x 500' sized pit bottoms in material that is free of big or solid rock and not wet. I need to know how much I can expect to move per shift by just making a berm all the way around with 3 to 1 slopes on the inside, winding...
  6. D

    Daewoo Solar 450-3 electrical problem

    This machine has sat for a couple of years with the side window knocked out. I've used it for a couple of months now. The instrument panel has been rained on because of the window out and yesterday it(instrument panel) started smoking suddenly. Shut it off, waited and restarted. No lights on the...
  7. D

    Can you get oil pan off without pulling engine?

    I have a JD 200C LC that has problems. Can you get the oil pan off without pulling the engine? I'm wanting to do an inframe on it.
  8. D

    How to replace track adjusting rod in 953

    I need to replace a track adjusting rod in a 953 05Z. The track was tightened the day before by a laborer and I jumped on it the next day to load a truck and noticed it pulling heavily to the right. I was running in sand so it was packing the tracks even tighter. I relieved the tension on the...
  9. D

    Case 480C box blade don't wanna go

    Case 480C of my neighbors has been leaking oil out of the torque converter for the past year and I told him to get it fixed. Now, it doesn't want to barely go forward in any gear. When you pull it into neutral, it stops like you have the parking brake on. Put it in reverse and he said it...
  10. D

    Cushion hitch accumulator malfunction

    623B 46P17XX serial number. It was working in the last 25 hours. My cushion hitch is getting oil into the nitrogen side of the accumulator. I know that from opening up the charging valve on the nitrogen tank while the cushion hitch lever was in the up position and engine running, and foamy...
  11. D

    Pc300lc-5

    Got a final drive going out on a PC300LC-5 and was quoted about $10k to fix it. I haven't ever rebuilt one and was wondering what kind of job it was. I've got the service manual on it. How are parts availability and how hard of a job is it? I see you've got to have a 50T press and a couple of...
  12. D

    416B gauges

    The tachometer and the coolant temp gauge is not working on this machine. I need a way to diagnose the problem so I can fix it. I don't know if it's the sending unit or the gauges, or maybe wiring.
  13. D

    Hitachi EX300-3

    This excavator is spitting oil out of the vent plug on the case where the two main pumps are bolted up on the rear of the engine. There is a small pump in the middle of the two big pumps, what is it? There is a dipstick on the case and it is over full as well. This case is bolted to the flywheel...
  14. D

    Options for Mercedes OM 460 LA

    I was quoted about $8500 today just for parts for an inframe thru my local Freightliner dealer, up from $5800 since Friday. They didn't have my serial number then, so quote went up nearly $3000??? It's in a 2006 Freightliner Columbia with 640K on the truck and original engine. What options...
  15. D

    There has to be a trick...

    I need to put a new pump supply hose on a 953 track loader. It's a 21" long x 2" diameter hose that slips over a steel tube with a rib on the end. In this cold weather, it's not happening. I tried to put o-ring lube on the inside of the hose to help slip it on, but I only got about 3/4" to slide...
  16. D

    Blasting some rock- video

    We shot some rock in the back end of the lake I'm building today that we couldn't rip. We helped to load the holes, it was neat. On the dry holes we used Anfo. On the wet ones we used Hydromite. About 9500 cubic yards. I was about 1/4 mile away so video is not great, it was shot from my phone...
  17. D

    EX300 blowing oil out dipstick

    This one's got me stumped. I don't have much background with this machine. The lift pump was out when we got it. We had it (lift pump) rebuilt and it runs great now for about an hour to an hour and a half and then it blows about a gallon of oil out of the dipstick. You can let it sit and cool...
  18. D

    Pattern change on Hitachi EX300

    Can someone tell me how to change to excavator pattern on a Hitachi EX300LC-3C? I think it's set up to backhoe style now.
  19. D

    D6T blade won't drop fast enough

    This D6T sn LAY907 has a problem with the blade. I have to wait on the blade to lower to make another push. I noticed (sometimes) if you tilt the blade at the same time as dropping it, it'll go down like it should.
  20. D

    JD 200C LC not traveling straight

    This just happened all of a sudden. When you push both travel levers, it steers to the left. You have to push the right lever more than the left to make it travel straight. My first thought was a bad final drive, but it doesn't seem weak. What else should I start with?
Top