• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. D

    Anyone know about JCB rear steering?

    210 and 212 models have a valve up by the radiator to use to adjust 4 wheel steering. Unfortunetly i do not remember the procedure. it had to do with flip lever turn all the way right and keep turning a bit after, the repeat to the left and close valve. or something similar. You might look for...
  2. D

    Where does this piece go?

    Should be
  3. D

    Where does this piece go?

    air filter intake cover
  4. D

    Hub conversion Fruehauf trailer

    No my hubs did not need changing, they were the same. Only needed new drums. Rims and tires of course.
  5. D

    Hub conversion Fruehauf trailer

    Should be easy. I just did that conversion to mine. my axles were newer , having been changed out four or five years ago. They were a direct replacement. New drums and bearings fit right up no revisions. My understanding if your axles are older than you will need a new outer bearing to match...
  6. D

    Hydraulic problems on John Deere skid steer

    does it or did it have a door?
  7. D

    04 F550 6.0

    Brandon They are not all bad. I have an early 04 - 03 model block, truck has 820,000km on it. Working on Engine #2 first went 760,000km then eat a lifter. The heads lifted at 200000, redone all stock, has always been stock. Second engine I bought from a scrapyard, it was the identical block from...
  8. D

    Cat 252 Won’t start/Electrical

    yes main breaker, should be in the engine compartment, look for a red button block, push to reset.
  9. D

    locates not proper and hit gas line

    Was your locate complete? And was it current? If you did not wait for all of your locators to complete their locate marking, you are on your own and are responsible no matter what you damaged. If you are out of date even by one day you are responsible even if the line was not on the locate. I...
  10. D

    Are all Case skid steer notorious for tearing up

    3 pumps and two motors make the system. Debris from one goes through all. You need to rebuild all the pieces at the same time and flush the oil lines. Otherwise you will just keep taking out each piece one at a time in short order. Did this once the first time it happened. I brought the pump...
  11. D

    262C Skidsteer misfiring and quitting when warm

    check your fuel tank for rust and debris. We had one of our cats exhibit similar symptoms to yours. It plugging the fuel filter with large debris restricting fuel flow. Our mechanics opened the tank cleaned and re coated the inside. Solved the problem. We ran a small inline filter pre filter...
  12. D

    Cat 302.5

    Neither did I until I spoke with our Cat salesman. We have a 305, as well, in our fleet. Here in Ontario the 302.5 is available as a basic ROPs only machine, any model larger comes with full cab etc, witch would double the cost or more.
  13. D

    Cat 302.5

    the 302.5 is a very different class machine from the 304 and up. Can't really compare those. We had one on rent for 5 months this year. Good, solid, strong machine for its size.
  14. D

    Hour Meter Question on Caterpillar Skid Street

    apply a sticker above indicating the number of hrs on the previous meter. Add the two together to get the current hrs.
  15. D

    Filter Crossover Challenge!

    https://dynamic.donaldson.com/webc/WebStore/search/application/parts_detail.html?kiosk=false try this click engine & vehicle info it does list your make and model with two filters available. Don't know if they are the one your looking for.
  16. D

    Calculating the weight of a granite rock

    I use 185lbs per cubic foot to be on the safe side for granite and 165 for limestone.
  17. D

    Ok Who's Man Enough to Operate It?

    i would my mother is a survivor
  18. D

    New Ford Pickups

    yes and yes The cab and chassis will have flat frame rails. The trans gear ratios are different and the bell housing will not interchange.
  19. D

    Caterpillar A19B auger

    what advice do you need?
  20. D

    Thomas 233 HD Skid Steer- Not starting

    Years back I changed a fuel pump on my 88 233HD. Same issue new pump no start no fuel. The pump was in to far, double gasket and it worked fine. Don't know why that worked but it did. Have you figured yours out yet?
Top