• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. D

    KX final drive "inspection plate" removal

    I succeded :DTanks a lot finaldrive. I figured It out myself. What I did I removed the ringing first. This was not easy at all. Secondly, I welded a bolt on one of the plug. Then, I screwed the modified plug on the plate and I gently pulled the plate with a hand winch. I also had to clean...
  2. D

    KX final drive "inspection plate" removal

    thanks :)
  3. D

    Kubota KX91 final drive inspection plat removal

    Hi there, does anyone knows how to remove that plate from a PC75? I have a small leak coming from that plate. I tought I need to remove the drive motor to remove that plate. But reading your posts, it seems much simpler than that. ????:idontgetit Thanks in advance Dany
  4. D

    KX final drive "inspection plate" removal

    Hi there, does anyone knows how to remove that plate from a PC75? I have a small leak coming from that plate. I tought I need to remove the drive motor to remove that plate. But reading your posts, it seems much simpler than that Thanks in advance Dany
  5. D

    full equiped sleeper

    I am looking for a a used truck tractor with sleeper (1 bed above the cab and another being the transformable kitchen table as we see on VR), with shower/toilett stove. I don't if these features actually exists on the market or if it has to be custom made? Any of you are aware of anything...
    • dany
    • Thread
    • Replies: 0
    • Forum: Trucks
  6. D

    1993 ford ln8000 parts

    I finally found a truck. It is an aeromax L9000 1995.Went to pick it up last friday. I did 300 km with it. Engine (CAT 3276) runs great. TRhere is some slack into the power steering wich is not fun (limit unsafe) to drive on the highway. Anyway I will get this fixed. There are also quite a few...
  7. D

    Ford or inter?

    Update, the auction was last saturday. I went to see the trucks on friday. Very disapointed with the body of the ford. This truck did a lot of snow plowing and was pretty much rusted. PTO did not engaged, stucked in the rust. A lot of body work to do to make the truck right. It also had a hole...
  8. D

    Ford or inter?

    Thank you. Hi to new-brunswick people Dany
  9. D

    Ford or inter?

    Hi everyone, I soon will go to an auction organized by a city nearby. I saw that they offer 3 trucks. One is an Inter 20S 1991 automatic with very low milage. The second one is also an Inter automatic, but a 1989 with 265 418km on it. Body ok, but some rust on the dump box. Finally the third...
    • dany
    • Thread
    • Replies: 4
    • Forum: Trucks
  10. D

    PC75UU-2 fuel pump timing

    Hello, With the mess I've done on my Komatsu fuel puimp, I am not sure that I am the best person to give advice. But usullay, one learn from his mistakes... hopefully...!!! Anyway, the problem I had, looked similar to yours. In my case it was the O-ring that leaked. There are a few things...
  11. D

    PC75UU-2 fuel pump timing

    update (ctd) I did not know what the prpblem was and this is why I called the dealer. The mecano did not know neither, but he suspected a pump problem. Then he took the pump to a pump guy who found the problem. The rest is history! If I knew what the problem was i sure could have process...
  12. D

    PC75UU-2 fuel pump timing

    update Too late! I screwed up. As I wrote I called the Komatsu dealer. It was not the timing. They took the pump of and brought it to a pump shop. When I changed the O-rings, I asked my son to crank the engine just to see how the pump work. Call me stupid and I hate myself for it, the plunger...
  13. D

    PC75UU-2 fuel pump timing

    Just changed 4 little o-rings, did not adjust or play with anything. Before it was running like new, now it smokes like an old charcoal boat. The springs maybe differents, but they are the right number for this excavators. Maybe its the one before which were different and they did the timing...
  14. D

    PC75UU-2 fuel pump timing

    Did not find what you said John. The counter weight is removed and I can see very clearly everything. :confused:
  15. D

    PC75UU-2 fuel pump timing

    Thank you' I am working on it. Yes there is one mark ion the pump aligned with on on the engine. The engine starts easily. It has 3400hr on it. It has power but I cannot leave it working, it is producing too much smoke in my garage. It does not smell like unburn fuel, just black smoke. John...
  16. D

    PC75UU-2 fuel pump timing

    Thank you guys, Sorry for not answering yesterday, I was on the road. Air filter is ok. But to make sure, I removed it, start the engine and same thing. The engine model is: 4d95L-1 The fuel pump is a zexel Your feedback is appreciated :)
  17. D

    PC75UU-2 fuel pump timing

    Hi every one. Fuel was leaking from the delivery valve hoder of my fuel pump. I changed the 4 O-rings on the delivery valve holder of my fuel pump. I also changed the 4 copper gasket as well as the 4 springs. Now, it stopped leaking but the PC75 is smoking (black smoke) like hell. It is...
  18. D

    Wiper wiring

    The wiper electric wiring of my PC75UU was missing when I bought my machine. The wire is missing from the wiper motor up to the wiper control. The dealer seems to have a hard time finding it. It has been two months now that they are trying to find it without success. Although they are very kind...
  19. D

    best grease?

    Thanks Rod, I will go with 3% moly in the futre on my Komatsu pc 75 Dany
  20. D

    second bucket for a pc 75 ?

    pc75 No, I actualy bought it from a guy who bought it last year (2008) at R&B auction in MOntreal. The excavator was at 2 km from home when I bought it. In 2009 the price was too high at this auction to make good deals. I don't know if this was also the case in Vancouver?? :)
Top