• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. G

    MF 50 Industrial Loader/Backhoe questions

    that is the dust sheild in the pdf not a gasketthe cross menber is for the loader I think. rearmain I bet but there is a oil line off of the rear of the head that could be leaking down. good luck
  2. G

    MF 50 Industrial Loader/Backhoe questions

    I use to own one no bad just clumbsy little light on the front. Oil leak sounds like the rear main, the 4 bolt cover you tightened is just a dust cover. I think that is a two part rope type seal so if you drop the oil pan you can replace rear main seal. I have had good luck w/ the local...
  3. G

    hydro problems huber grader

    Just got a call today from a friend and here is the story 1968 huber fullsize grader hydraulics very slugish oil levels ok filters new. So he installed a new hydro pump and filters now oil is being forced out of the vent on the trans. I haven't been out to the machine yet...
  4. G

    WABCO 666 B parts

    I was looking for a shifter for a 666 B grader broke off flush w/ the floor where the roll pin goes through. I think could be welded and supported but won't mind replaceing this part. There is a lot of leaverage on this part As we all know it will break at the worst place and time...
  5. G

    Would You Haul it ??

    Tiny Why don't you use the D rings on the low bed? The angle looks good chain wont hit tire.
  6. G

    Help Me Find A Door For My 14E

    cletus may be it's time to fire up the welder and build one. Just had glass put in a door cost 290.00 Cheers Gravey
  7. G

    Austin Western brakes on 6 wheel drive grader

    Are the brakes ajusted up ? Or oil leak on brake shoe? that's where I would start.
  8. G

    starting problems over 5000 ft.

    i have a 2007 672 ch john deer grader will not start when it is over 5000 ft elevation we have artic package plug it in and still will not start I think it is some thing in the computer program have had no luck w/ dealers .
  9. G

    WABCO parts

    Need a little help finding brake hardware kits for hydraulic brakes on a WABCO 666 B . Master cylinder and wheel cylinders were ea$y but springs have been a bit of a challenge. cheers Gravey:usa
  10. G

    Help with old Kubota

    Jessie Is the oil supply lines correct in is in out is out. might try switching them. is this the right loader valve closed center or open center may be w/ wrong valve could be just by passing. good luck Gravey
  11. G

    My pictures

    looks good !! nice to see some new posts been pretty slow lately. :usa
  12. G

    Weird caterpillar soil compactor ???

    terex scraper We have a terex scraper that some one converted with a grid roller in the belly she works great. :usa
  13. G

    Your Lowboy Pictures Wanted

    Here are a couple of pics of us moving our dump truck and formans pickup to one of my farms. :usa
  14. G

    Wabco 666 b repower

    Ok old wise one. Dam young guy's messing w/ you again! Hopefully I can get my kitchen pass signed for a little longer. Cheers all Gravey :ban
  15. G

    Wabco 666 b repower

    Wabco 666 govenor BIGRUS THAT IS A 300 CUMMINS BIG CAM 3 SO 300HP. THE 1 THING I HAVE GOING FOR ME IS THIS GRADER HAS A PIERCE GOVENOR ON IT TO CONTROL THE THROTTLE. ONE MORE THING THE DREAM TEAM IS NOT GOING TO RUN THIS ONE AS WE ALL NO THEY CAN BREAK A STEELY IN A SAND BOX ...
  16. G

    Wabco 666 b repower

    PICKED UP A WABCO 666 B W/ A POWER-FLOW TRANS AND MECHANICAL CONTROLS THIS SUMMER W/ A BLOWN UP HR CUMMINS. SHE'S A LITTLE OLD BUT THE CONDITION AND PRICE WAS RIGHT. AFTER SOME RESEARCH FIGURED OUT THAT OLD CUMMINS PARTS ARE EXPENSIVE AND SOMETIMES A LITTLE HARD TO FIND. SO AFTER SOME...
  17. G

    Adams Leaning Wheel Grader

    great restore save that old iron:usa
  18. G

    My pictures

    It's mechanical W/ a power flow trans got it fired today. Every thing works good! Need a little ajustment on the pierce govenor. some slop in linkage think that is what's causing the problem. I will get the pics put to gether
  19. G

    My pictures

    Nice to see some of your projects. I pick up a 666 B Wabco this summmer w/ a bad motor. I have been doing a little repowering, just about to fire it up next week. Have a few pics. will send when I get my kitchen pass from the admistrator.
Top