• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. B

    Takeuchi TB-007 with blown engine

    Sure, but it is in the St. Louis area, but might be able to drop it off on a trip to Georgia, or Washington State, will be driving both ways in a month or so. Where are you?
  2. B

    Questions about a Mitsubishi BD2f

    Jim is a good guy. He helped me. Bubba
  3. B

    Takeuchi TB-007 with blown engine

    I got the engine from Surplus Center, and it was new, but from either an reefer unit or APU for use on semi trucks. it must have been when they were swapping models or something at the oem. I have seen them listed there several times, they don't last long, and have thought of just buying one for...
  4. B

    Takeuchi TB-007 with blown engine

    It is running, but tends to run hot since I had to remove the fan shroud to get the replacement engine in (it was about an inch different as I remember). I have a 12 volt fan to put on it, but never did. It is just a weekender, so if I only run it an hour or two in the fall, winter or spring it...
  5. B

    Average age on the forum

    57 in a week or so, feel like it most of the time as well. Started by fixing all the appliances in the house when I was a kid
  6. B

    Mitsubishi BD2F blade weight

    7,672lbs for BD2F-1B0 1b5 7,875lbs is what Ritchies says, manuals say 8,598lbs for BS3f, the shovel version for standard tread, 9,259lbs for the swamp track BS3F. Add a little for all the dirt I it:) Bubbagoat
  7. B

    Considering a Mitsubishi BD2G

    I have a BS3F and a BD2G. Both sit outside at the moment. I've never replaced a hose, but the previous owner of the BS3F replaced 2. He said they were A japaneese thread, and had to have them special made, about $60 each I think he said about 3 years ago. We have replaced the cutting edge and...
  8. B

    Section for komatsu d20,21 and similar grey market dozers

    that's a nice looking dozer, bet it's great in the winter in that cab. bubbagoat
  9. B

    Mitsubishi BD2F crank shaft

    You should be able to find a used one around, but you could try Chinese if you need. I think the engine in the F series is a Mitsubishi 4SE. I think the engine in the G series is a Mitsubishi 4SE-2, changes to the swirl chamber, but don't know if the crank is different. There are used S4E...
  10. B

    BD2G steering problem

    Great summary sidehiller. how much was it if you don't mind for the relined brake bands? I'm probably close to needing to do this on my BS3F, or send me a pm if you want. Bubbagoat
  11. B

    mitsubishi wiring help

    Let me know if you continue to have problems. I have a BS3F in the Hull, GA area that I can check if it helps, or take photos of. I don't have an electrical diagram for it that I can find. JimInOz is always a great help. Bubbagoat
  12. B

    BD2G steering problem

    Please send a photo, I may need to do this sometime, and would like to know what you used. Thanks Bubba
  13. B

    Gray market mitsubishi BD2G ?

    Cat to shift production from Japan to USA http://www.yanceybros.com/news/caterpillar-expands-operations-in-united-states-new-factory-near-athens-georgia-expected-to-employ-1400-people When Cat inported them, they were Caterpillar. If they came in from some other country first, they are grey...
  14. B

    Gray market mitsubishi BD2G ?

    Smaller CATS were made by Mitsubishi I think they are all grey, the non grey Mitsubbishi's are branded CAT.....They made the small cats, but not as small as a BB2G
  15. B

    Section for komatsu d20,21 and similar grey market dozers

    The new link worked great. Thanks Bubba
  16. B

    BD2G steering problem

    Glad it's fixed That's the way to go, glad you got your problem solved, and nice to see you posted the solution. It may help somebody else one day. I love my mitsubishi's, even though I don't run them much, they are great when I need them.
  17. B

    Takeuchi TB016 Swing will not work.

    You can look at the parts manuals at this site and get a better look at where things go and how they work, it has really helped me with my TB007. http://www.mwesales.com/parts-takeuchi.html Bubba
  18. B

    Mitsubishi BD2H & J Manuals required.

    That looks like something we could do, but probably not quite so nice looking. That is a fine looking dozer, must have been well taken care of. Bubbagoat
  19. B

    Mitsubishi BD2H & J Manuals required.

    Andrew, Can you post some photos of the ripper assembly on the back of your dozer? I have a BD2G and have been thinking of adding a ripper or a subsoiler to the rear of it. Thanks Bubbagoat
  20. B

    Mitsubishi BD2H & J Manuals required.

    Jim, PM me with the details on the gasket you need and I'll see what I can do for you. Thanks for your help on my F manual, I have a D parts catalog, but nothing newer than G models yet. Bubba Goat
Top