• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. F

    ford a62 loader fuel injection issue

    update the pistons in side of pump had wore out bores and thats lead to bleed back pump out for over haul
  2. F

    ford a62 loader fuel injection issue

    i have eletric fuel pump so factory lift pump not being used i put stock lift pump 40 .00 aftermarket on and removed it to see if that was the issue
  3. F

    ford a62 loader fuel injection issue

    i have a 1978 ford a 62 loader with a 256 td motor with an minimec injection pump if it sit for a few day i have to bleed injector check all in coming hose and out going lines for leaks replaced checck vavle at punp still have bleed rack move fine and when i push escess fuel buttom rack move as...
  4. F

    57 Case 310 Loader

    Add pertronic ing system for around 80.00 bucks it will make it run better and no more points to deal with
  5. F

    57 Case 310 Loader

    Try nash tractor in nh they have lots of older parts
  6. F

    Largest machine I have ever seen in New England.,

    They blew up lots of rock at that site
  7. F

    How Did You Find Us?

    I found this site from the jd crawler forum
  8. F

    Fuel Tank Cleaning

    It is under late model tech title is diesel fuel lubricity if you can not find it i have printed out i will fax it to you if needed cary
  9. F

    Fuel Tank Cleaning

    Check out jd crawler forum great write up about fuel
  10. F

    Fuel Tank Cleaning

    How long before fuel is no good we have gas in bike that is bad after 3-4 weeks how long with fuel oil ???//
  11. F

    New guy

    Hi my name is cary iam a service manager at a jap bike dealer andf have run autobody shops for the last 35 years glad to join this site very well rounded forum thanks cary
  12. F

    Where do I buy hydro adapter's

    Northen tool has a lot of fittings
  13. F

    CAT 262 battery problems??

    I would try a voltage leak down test and see if you have the same voltage at the end of the cable that you have at the battery post sould only have a small amout of loss like stated above i cut the covering off of cable to find that the wire has been blow away in side the housing
  14. F

    Skid Steer Snow Removal Question

    I cut up old plastic barrles and line blade or buckets with them
  15. F

    Bob-Tach stuck

    Somtime on stuck hardware i will heat it up with a propane torch and melt a candle to the stuck part to free it up you must ride a gsxr600 by your handle i service them at a dealer good luck cary
Top