• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. D

    John Deere 300b industrial tractor

    No schematic here, but don’t forget the neutral start switch.
  2. D

    Low coolant temp?

    No factory fan clutch on a 310J.
  3. D

    Low coolant temp?

    The transmission and hydraulic oil coolers are liquid to liquid oil coolers and are bolted to the inside of the frame on the right hand side. .
  4. D

    Low coolant temp?

    The aftercooler , transmission cooler and hydraulic cooler are all remote , meaning not in front of the rad.
  5. D

    Low coolant temp?

    You have a machine serial number ? I suspect you’re not working the engine hard enough. In cool ambient temperatures you should be able to get away with blocking off some of the air flow to the rad ,the only things in front of the rad are the fuel cooler and the A/C condenser.
  6. D

    Deere machine that used a Funk DF250 transmission?

    Deere construction/forestry machines uses mostly DF180 , DF230 or ZF transmissions. They may use different components on the AG side. Are you trying to locate a complete transmission ?
  7. D

    John Deere 180g wiper motor

    Brandt doesn’t like to lose a sale, they can likely get you an aftermarket motor from ITR.
  8. D

    Hitachi ex200 hydraulic/engine problem

    While looking at possible engine issues , Check for a plugged screen in the fuel inlet line banjo bolt on the fuel transfer pump.
  9. D

    Hitachi ex200 hydraulic/engine problem

    KJ , check your messages.
  10. D

    John Deere 310J Transmission Oil level check / Parking brake issue

    Welcome to HEF Tech :cool: . A full machine serial number would help to provide accurate info. Trans dipstick location is in the link below. https://techinfo-omview.apps-prod-vpn.us.e06.c01.johndeerecloud.com/omview/omt210365/09001faa80cabf04
  11. D

    Hydraulic Attachment First Time Use

    Hi Ricardo, you need to upload the video to utube and then post the utube link here .
  12. D

    JD 444D Brake Question

    What was found in the brake filter housing ? Was the end of the brake filter cone blown out ? That brake hydraulic system does not like any kind of debris at all. Like mg2361 said you need to check the brake system pressure and the unloading valve pressure.
  13. D

    Hitachi Ex120-2 slowly armor plating

    Looks great !! Is this the one you did some line boring at the frame / boom joint ?
  14. D

    Hydraulic Attachment First Time Use

    Double check the attachment manual or the brush cutter itself for any markings / stampings of inlet and outlet on the brush cutter before switching any hoses at the motor.
  15. D

    Hydraulic Attachment First Time Use

    Happy Easter ! When operating the backhoe, the left side plumbing is the attatchment supply side. Put the selective flow switch on the dash in the center middle position . At an idle just touch the foot switch for a couple of seconds to flush a gallon of oil from the left side into a pail.
  16. D

    Deere 200 clc hyd. Issue

    Not to be a smart a** , but are you possibly confusing the propel flow combiner valve for the auxiliary function flow combiner valve. The auxiliary function flow combiner is on the bottom of the 5 spool side of the control valve. It is shown as #1 in the screenshot below. .
  17. D

    Deere 200 clc hyd. Issue

    Here is a clearer breakdown of the propel flow combiner valve . It’s #1 in the screenshot below. .
  18. D

    Deere 210G LC: where, precisely, is the Pilot Shutoff Solenoid Valve?

    Welcome to HEF h2y :cool: . .
  19. D

    Deere 850K Has Active Fuel Codes But I Cannot Find Codes In Service Advisor

    In Service advisor look for engine manual CTM120019
  20. D

    John Deere 450J wont move

    The (2) transmission codes don’t look familiar. @mg2361 could likely help sort your issue out.
Top