• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. W

    building bush hog need help with hyd motor choice

    well i just figured i could build one one for about $1000. Buy an old three point bush hog with one wheel buy a hydraulic motor and couple it to the gear box. build a face plate and wa la got a mower for cheap. easier said than done.
  2. W

    building bush hog need help with hyd motor choice

    Trying to build a bush hog. Not familiar enough with hydraulics to figure out what motor i need. Building a 5ft bush hog and my machine is a new holland L170. Its 52 hp, 113ft lbs torque, 17.7gpm hyd flow (does not have high flow) 12.5 hyd capacity(reservior and system capacity) machine rpm...
  3. W

    need help on purchasing a grapple bucket

    I am looking for a grapple bucket in the 1500-3000 dollar range. I would be using it to pile brush, pick up cut wood, and if they make one i could use to get rocks out of my fields that would be helpful to. I like the buckets that have open ends, with longer tines(like 30") and two grapples...
  4. W

    wow what a machine

    sorry not computer smart
  5. W

    wow what a machine

    Just traded skid steers. Had a bobcat 751 that was a basket case for a new holland 170. Man what a power difference. Plus visibility is better in my opinion. Best of all i made 2000 off my trade, man what a deal.
  6. W

    looking at newer machine tracks or tires?

    looking at a S130 2500hrs for 10,900 2005 and a 2003 T190 1700 hours for 12,500 both machines are about the same condition(paint,looks,tires,etc..) I mainly use my machine for cutting wood and splitting it. I will be running machine in a woods a lot. Any cons or pros to either machine? Is...
  7. W

    need help troubleshooting

    I already flip flopped the wiring. The only thing that stays the same is when you twist either hand controller outward. I only get the 5 flashes in the handle then. Which ever 1 you twist outward first is the actuator you get the code on. Talked to bobcat in 3 different places their...
  8. W

    need help troubleshooting

    got a 751 f series w/ahc. Have an intermediate problem where the loader won't lift or tilt. Get 5 flashes on handle which is for a bad actuator. Checked sensor supply voltage and signal voltage going to actuator and that was good. Curios if I'm right with faulty actuator before i order it...
  9. W

    loader not working(number of flashes?)

    Need some help guys. Got a bobcat 751 loader will not raise and tilt for bucket will not work. Got 5 flashes on left handle on the left light. The BICS in the back of the cab has 4 lights (I Think) one is out it says valve with a picture of the loader.. Can someone help me with whats going...
  10. W

    bobcat 751 aux troubles

    hay guys thanks for the help. come to find out the 2 spools i replaced on top of the control valve were bad from the factory. got 2 new ones from bobcat friday and put them in today and it works great. thanks again brandon:)
  11. W

    bobcat 751 aux troubles

    its an f series and when i put 12 volts straight to them the did not work correctly either. I already replaced the bics solenoid and spool. hay, bobcatmechanic when you said aux controller are you talking about the control valve actuators on the front left side of the control valve as your...
  12. W

    bobcat 751 aux troubles

    I bypassed all the controls by taking 12 volts straight to the solenoids on top of control valve? I also had tried changing the solenoids around. Can you use your momenatries on either joystick(ahc) left or right, center push button left to right? Thanks Brandon
  13. W

    bobcat 751 aux troubles

    ya i checked them on the rt side of control valve but not on the left side. If the springs are not broke, you got any other idea thanks brandon
  14. W

    bobcat 751 aux troubles

    sorry for the long post, just trying to give a good view. When I hit my aux switch in my handle(ahc) my ram will trvel out even if i just bump my momentarys. No, I don't have it in continuous operation. Once my ram travels out all the way to the end it acts like it builds pressure for about 2...
  15. W

    Newbie Q&A: Pros / Cons for 07 JD 317?

    I farm and own John Deere equipment parts are easy to find, but they ant cheap.
  16. W

    863 Breakdown again.....

    does it keep blowing the same injector/same cylinder number
  17. W

    I need a repair manual for a Scat Track!!

    usb tractor.com? may help
Top