• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. joestewart

    Calling all Snorkel Experts! TB 60 Boom Lift Woes - Idle issue - Please help!

    Looking for a Boom Lift forum – could not find one so I thought I would post here. Attention Snorkel Experts: TB 60 Fast Idle Woes – Please help We bought this TB 60 with the Deutz diesel engine about 3 years ago. It worked fine for several months. Then we began to have “idle problems” which...
  2. joestewart

    Mustang 960: Jerky steering / intermittent right sided drive failure

    This problem has developed over time and now it has gotten worse and is really starting to annoy me. This is a 1992 rubber tired Mustang 960 with the "tee handle" steering. The problem is difficult to describe. The diesel engine and hydraulic lift cylinders and controls work fine. The left...
  3. joestewart

    Need help figuring out the rim offset - Mustang 960

    I owned this machine for five years before I noticed that the offset of one of the rims is different from the other three. The previous owner must have replaced one of the rims and he put on this bogus one. The offset of this rim is such that the inner sidewall of the tire will rub against the...
  4. joestewart

    Finally scanned my John Deere 2010 forklift manuals & a couple of more

    I know these forklifts are as rare as hen's teeth. But I had a parts manual and an operator's manual for the Deere 2010 forklift sitting on my shelf, so I thought I would scan them. Also scanned the parts manuals for a few other deere forklift masts and 3-point attachment type forks (the model...
  5. joestewart

    WTB: Rim for a Mustang 960 skid steer loader

    I'm looking for one (1) rim for my Mustang 960 to replace a damaged one. I'm looking for the type of rim that would hold the pneumatic tires 12-16.5 NHS. If anyone knows where I can find one, please let me know! Thanks J. Stewart
  6. joestewart

    Want to Buy: Tilt cylinders for a Mustang 960 skid steer loader

    Anyone have a pair of used tilt cylinders for sale that will fit a Mustang 960 skid steer loader? Early 90's model. Perhaps someone knows of a Mustang bone yard that they can direct me towards? Need two (2) tilt cylinders. The rods on mine are bent! Thanks
  7. joestewart

    Lull 644 - the counterbalance valve on the boom lift cylinder

    This is an early '90s Lull 644. This telehandler has served well over the last couple of years, despite several minor problems. Its not used for business - just to accomplish a few heavy lifts out at the rural property. Here's a new problem that has come up over the last month or so. The...
  8. joestewart

    Anyone familiar with the Funk 4000 Long Drop Transmission?

    This is the transmission in my Lull 644. Ever since I've been driving this telehandler (about a year), it has always felt like the transmission clutches are slipping, so I hooked up a pressure gauge and measured the "charge pump pressure". According to my manual, this pressure should be...
  9. joestewart

    Anyone have a wiring diagram for the Kubota KH-191 Excavator?

    I'm helping a friend chase down a wiring gremlin. We'd like to trace the wire for the electric fuel pump on his Kubota KH-191. Seems to be shorting out somewhere. There's not much of a harness on this machine, so it cannot be too complicated. If anyone has a wiring diagram or can direct me...
  10. joestewart

    What grade of steel is used on Fork Shafts?

    I need to replace the fork shaft on my 644. Its 1-3/4 inch diameter and 54 inches in length. Made some calls to the usual telehandler parts houses, and gentlemen it seems that some of them are just having their local steel yards cut some round stock to length, and then reselling this to the...
  11. joestewart

    Mustang 960 - Where do you buy Isuzu 4JB1 parts?

    I already know to go to my nearest Mustang dealer, but I was wondering if there are any parts houses out there where I could save a buck on an engine part. I need a thermostat housing for the 4JB1 diesel engine. The housing is aluminum. Mine corroded from the inside and is weeping coolant. I...
  12. joestewart

    Huge Gradall 554 on the GSA auction - in Texas

    Looks like a nice mechanics special located in Marfa, Texas. Still has a couple of days to go. I have no interest in it. Thought I would give everyone else a heads up. Use the search term "material handler" or "excavator" or just go to the Texas page on the GSA auction website. Good luck...
  13. joestewart

    Lull 844 644 Owner Operator Manual now avail on pdf

    I scored an owner/operator manual and ran it across the scanner. This is publication #P09980. There's no publication date on it, but this manual is obviously for the earlier model 644 and 844 Telehandlers. The dashboard and controls in the pictures are similar to my machine, circa 1992. 32...
  14. joestewart

    Got the Spicer PS1350 axle manual in pdf format!

    The axle was used on Lull and Skytrak machines and probably a host of others. This is the axle used on my 1992 Lull 644 Highlander. Manual is titled "Maintenance Manual Models PS/PR 1350, Planetary Wheel End, Wheel End Brakes, and Steering Cylinder" In pdf format! I can email...
  15. joestewart

    Vintage Lull owners: I have your service manual!

    I have the service manual for the 644, 844 and 1044 in pdf format. Info current as of 1997. I can email it to those that need it. Not asking anything in return, although I "wouldn't mind" if someone could scan their parts manual for the 644. It will require several emails. Takes a long...
  16. joestewart

    Mustang 960 owners: I have your parts manual!

    Hello fellow Mustang 960 owners. Someone has given me an electronic copy of the parts manual for the 960. Its in pdf format and can be emailed. "in part or whole" - no charge! I also have the service manual that covers the 930, 940 and 960, also in pdf format. Manuals are dated 1994. The...
  17. joestewart

    Mustang 930 940 960 Have Manual Will email

    I just acquired the factory service manual for the 930 940 and 960 in pdf format. The scans aren't the greatest quality, but they are readable. If anyone needs a page or two to help them in their repairs, I'd be happy to share. Just need a valid email address. J. Stewart
  18. joestewart

    Just bought a Lull 644! How much does it weigh?

    I put in a bid and won a fixer upper model 644 Lull Telehandler. Cut and paste the ebay link or check out item #170442453396. Feel free to critique the purchase. http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=170442453396&ssPageName=STRK:MEWAX:IT I have not personally inspected the...
  19. joestewart

    Any Kubota boneyards out there? Model KH191

    Hello, Our KH191 Kubota excavator has been acting up over the last several years. We knew something was wrong - it kept consuming coolant, could not tell why, but it ran good and functioned well. Well, last weekend, while digging a swimming pool, it really went south, dumping compression...
  20. joestewart

    Just picked up the Bantam C744 Teleskoop! - pictures

    Does anybody else own one of these? We bought this as a toy, because the price was right. It has the Detroit Diesel 4-53. Seems to run and operate good. A 1988 model. Bucket needs some steel plate and welding work. I'm working on changing all the fluids now. Before we picked it up...
Top