• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. I

    Case / David Bradley 990 Hoe? ( farm tractor with hoe? )

    I'm going to look at a David Bradley ( British ) 990 backhoe this weekend. From what I gather it is realy a farm tractor with a 3 pt hoe attachment, is this true? The 990 seems to be a ~ 6,000 LB 60 ish HP tractor made from 1960 to 80. The motor supposedly has rod noise but no hole in the...
  2. I

    WTB IH broken/parts backhoe/loader (3500 or similar )

    Looking for a IH backhoe - loader, non runner / broken / parts machine. Something like a 3500 or similar. ( 2400/2500/3400/3500 1970's and I think 240A, 250A, 260A 1980's ) Might consider a 574 farm tractor as the driveline is similar. I'm in SW PA.
  3. I

    IH 3600 hydro trans? ( like 656 Farm )

    Looked at a IH 3600 backhoe with a hydrostatic trans today, machine goes forward but no reverse. If the rear wheels are off the ground, they will jerk when the reverse peddle is pressed but will not rotate. There are a couple of unknown levers, owner says one might be for high / low range...
  4. I

    Bent front bucket edge repair?

    Clip on forks bend loader buckets! ~ 4,000 lb of concrete walkway squares ( 24 pieces 2 ft X 3 ft ) This is on my 70's IH 3500A. I've managed to put a 1" or so bow in the leading edge using clip on forks. I'm real tempted to put the bucket on upside down and pick something heavy to...
  5. I

    Mid 70's IH 3500 loader valve maker?

    Any idea who made the hydraulic valve for the loader and what series it is? From the pictures, it sort of looks like a industry standard V30 series stack valve but the lower bolts are outside the fluid pattern and not between. ( If you look at a V 30 valve you will see what I mean. ) The...
  6. I

    Online manuals IH / Case ?

    From reading other posts here, the Case site is supposed to have a section for online manuals but I can't find them. Any idea where to find them? Thanks
  7. I

    IH 3152 hoe swing rebuild?

    Early / midf 70's IH 3500A with a 3152 hoe. The swing is leaking from the top seal ( the area below the seal sees constant hyd oil circulation to lube the swing rack ) It looks like the seal is pressed into a brass bushing that is also the swing shaft bushing. Any insider secerets to...
  8. I

    IH loader hyd valve brand / add on valve source?

    Mid 70's IH 3500A loader backhoe ( the 3400 is similar, the 2400 and 2500 might be as well ) Am looking for the manufacturer of the loader control valve. The goal is to add a third valve to control fork side shift. The dash is cut / labeled for a aux control valve so I know they exist...
  9. I

    Pin / bushing source - sizes?

    Early / Mid 70s International 3500A loader / 3152 backhoe. Looking for a source of oversided OD bucket / link bushings. Any one know of a list showing common bushing dimensions? My front bucket pins are 1 3/8" ( 1.372 actually ) Bushing OD looks to be 1.624 ish. The link the bushing...
Top