• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. K

    john deere 318D skid steer service manual

    sent
  2. K

    Hydraulic problems on John Deere skid steer

    Yes, this is. This is a more described post of the issues, aux are not engaged
  3. K

    john deere 318D skid steer service manual

    My serial says 328B but can’t find anything on it which seems weird to me?
  4. K

    john deere 318D skid steer service manual

    I havnt had much work on them, today had the chance to work on 2 with 2 more to work on. Not a fan so far lol, but just like any skidsteer has drive issue faults
  5. K

    john deere 318D skid steer service manual

    jason@nextleveldiesel.ca
  6. K

    Hydraulic problems on John Deere skid steer

    currently having an issue with a 329 b serial #t00328b123484 they sent to dealer after it died, dealer said no issues after blowing out fuel lines. came back to site died. back to Deere, couldn't find issues but could not get running. customer loaded up machine and brought back to there shop...
  7. K

    john deere 318D skid steer service manual

    Any chance you have service manual For 328?
  8. K

    John Deere 328 no start

    Hello, have a customer with a 328 Deere skid steer that has no start. Operator drove into a pile of rock to pick up and unit died and would not fire back up, all fuel line was replaced. No issues with fuel pressure and have exhaust smoke but Voltage drops down to 8.9 with new battery and...
  9. K

    Service Manual Trading Post

    Anyone have a manual for a case 580 super N or have the procedure for injector removal/install
  10. K

    Case 580 superN

    Hello, does anyone have a manual for a case580 superN looking for service manual or break down of re installing transmission
  11. K

    Case 580super k rear output bearing

    Sorry! Yes super N And yeah customer has asked to just try to replace bearing as machien has already cost him to much, he was hosed for 16k on breaks by a dirty mechanic. Tried to heat bearing and use puller but did not seem to be moving, but just by the look of the bearing it should be able to...
  12. K

    Case 580super k rear output bearing

    Hello currently have a case 580 Super K backhoe, customer had rear output seal leaking, upon inspection we saw that that main rear shaft bearing has failed. Does it require pulling trans apart or can be pulled from back? Pictures attached
  13. K

    Newholland ts115a

    Hello, currently working on a newholland ts115a, keeps blowing fuse 41, and kills all rear hydraulics, been searching with no luck on schematic and found no issues in wires, will work and then randomly blow fuse
  14. K

    John Deere 250D

    Hello, working on a John Deere 250d Has intermittent problems with no starting, also has 3 active codes on dash which I believe to be causing The customer the problems. Ecu 629.13 controller FLT calibration TCU 5055.2 can bus fault intermittent CMU 2000.9 ECU CAN COMM BAD UPDATE RAte. Any help...
  15. K

    Safety lever issue

    Will ge Will get back to you, checked all coils on hydraulic side and they checked out, was missing voltage on same which I found weird, but found the starter crap the bed so ordering new one, I’ve checked lockout arm and it’s a pressure switch that seems to be working, my valve looks different tho
  16. K

    Safety lever issue

    Working on a Hyundai 160lc, when raising the hydraulic lock out lever, nothing happens, have no movement, where would I start? Checked fuses all good
  17. K

    Hitachi EX swing issue

    Hitachi 17 with a swing issues, brake only locks up some time which I believe it is actually a valve sticking just looking for placement of said valve? Any help Would be appreciated
  18. K

    Volvo ew180b error codes

    Now have code 130 ppid 1092 1 what would that relate as in park break
  19. K

    Volvo ew180b error codes

    So found the sensor for m2404 open, where others were around 26-30 ohms, I swapped sensors and problem followed to another.
  20. K

    Volvo ew180b error codes

    For m2402 should I have constant 24v to sensor?
Top