• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. C

    99 duetz f3m 1011f

    I am in South Dakota too if that makes any difference. I did send a request to deutz out of Kansas City as well
  2. C

    99 duetz f3m 1011f

    Good afternoon, I have a f3m 1011f with a dead cylinder. I am looking for a company that does reman motors. Anyone have good luck with a company? I have sent some quote requests tonight to a couple.
  3. C

    Duetz 1011f wiring diagram

    Good afternoon all, I am looking for a wiring diagram for a duetz 1011f 3 cylinder. It’s in a gehl 4635. The starter fuse in the cab started to trip and has a fault on the wire.
  4. C

    Duetz 1011f

    I replaced all the fuel lines, emptied fuel out, and replaced fuel filter. The smoke is mostly gone now. A little bit that’s hard to see. It still has a tick noise. It did have a little pulse going when the throttle is low. I’m still not 100% how you get that filter out of the lift pump. The...
  5. C

    Duetz 1011f

  6. C

    Duetz 1011f

    Yea it’s a single screw in center. I might try a flex bit to get to it. I’ll see what tomorrow brings. Thanks for all the input BTW Any special fuel additive you would suggest?
  7. C

    Duetz 1011f

    I followed all the fuel lines. Nothing in line, and no primer ball like I have read about. To me the fuel line shave maybe been replaced at one time as there are actual hose clamps in spots vs the spring loaded style. I have read there is a mesh screen in the lift pump. The screw to that is t...
  8. C

    Duetz 1011f

    I’m going to drop fuel filter and drain the tank and replace rest of the fuel line from tank to motor. I had it trailed one time to take to my brother in laws and put full tank of fuel in….seems to have been when it started to act a little funny. The cylinder that I feel to have issues with is...
  9. C

    Duetz 1011f

    It was acting this way before the injector change also.it didn’t have a miss so bad today when I ran it. Definitely a “tick” sound but I pulled the valve cover and looked down ea h of the lifters and they all looked straight. Ran a little bit with the valve cover off and all seems to work to me...
  10. C

    Duetz 1011f

    I ran longer this time did same thing and have nothing. Was super Smokey to start with then became less but still decent amount. Too me it seems like it’s not burning all the fuel or getting too much as it’s hard to stand behind it for much time.
  11. C

    Duetz 1011f

    I did that this morning, ran it for about 5 minutes then used white rag. Didn’t have anything on it.
  12. C

    Duetz 1011f

    Ok, haven’t worked on this for awhile. Today I pulled the line from the injector pump to the injector(furthest back). The white smoke went away, but still had a little bit of a tik noise. Put the line back on and still had a a little smoke after but had more power. Could it be injector pump...
  13. C

    Duetz 1011f

    Muffler is on havent dug more into it it’s been cold here…the smoke is just snow melt from inside….too me being inside it sounds more like it’s under Meath my feet vs behind in motor but at a loss….didn’t have much power until the other cylinder kicked in. Maybe air in fuel line in earlier issue.
  14. C

    Duetz 1011f

    Ok, so I ran it for a little bit today. Smoke went away and temp checked the cylinder that wasn’t heating….was about the same as the other two. I’ll try to include a video of what it’s doing. Not sure what is making the noise. It gets loud and does quiet a little bit...
  15. C

    Duetz 1011f

    I never pulled the manifold off, but I can see where it goes from the motor to the manifold is discolored. Just randomly started to smoke. Never changed belt or had issues before.
  16. C

    Duetz 1011f

    There was a light smoking after I changed filters. Almost not even noticeable. But has been worse after I owned it.
  17. C

    Duetz 1011f

    Machine has 2300 hours on it. I bought it before last winter and just started doing this a few months ago. Just an acreage skid loader but have been using it a lot for dirt work. I haven’t done anything to it other then change filters in it after I got it. The cylinder in question looks like the...
  18. C

    Duetz 1011f

    Thanks for the response. I temperature checked at the exhaust…..the furthest back is about 100* cooler then the other 2
  19. C

    Duetz 1011f

    Good afternoon, I have a gehl that has a duetz 1011f motor 3cylinder. I have an issue with it as it is blowing white or white/gray smoke and also has a miss in it. The return lines going into the injectors had many leaks and have since replaced them, I also put new injectors and put a new valve...
Top