• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. C

    Gremlins

    an update for the record .. the gremlin (I hope) was the connector to the pilot control solenoid .. there is an 8 spool solenoid valve of the side of the hydraulic tank .. by schematic . bottom right hand toward the access door .. got the little devil
  2. C

    Case 9020B lockup

    Ok .. have a 9030B with some of the same symptoms .. replaced the throttle motor .. replaced the computer .. just to find out it was the RPM Sensor .. I got that advice early but didnt listen .. good luck
  3. C

    Gremlins

    Ok .. so to go along with all the other annoying issues that come with older machinery .. here's one that will ruin an operators day .. My Case 9030b will randomly and without warning .. go to sleep .. by that I mean the hydraulics completely disengage .. nothin .. not one hydraulic function...
  4. C

    3 Speed Travel Problem on Case 9030B

    I will check the pressure at the motor .. and to answer your question, neither side shifts .. I assumed since neither side shifted that it was and electronic issue vs. a pressure or pump issue
  5. C

    3 Speed Travel Problem on Case 9030B

    So my old faithful Case 9030B has a travel speed issue .. the switch does work .. the travel speed indicator does cycle .. but the ground speed does not change .. Wondering if there is a solenoid that activates the swash plate that may possibly be bad .. I am all mechanical and not so much...
  6. C

    Splitting auxiliary hydraulic

    I added a hydraulic quick attach to my Case Hoe a couple years ago and would like to do the same .. aux. runs the thumb and I have it plumbed with quick attach fittings .. I disconnect and reconnect every time I change buckets .. would have been further ahead getting a mechanical quick attach ...
  7. C

    Case Motor Fuel Injector

    Thank you very much ... order placed .. hopefully they are correct and all works .. Again .. Thanks
  8. C

    Case Motor Fuel Injector

    Been awhile since I have been on .. hoping someone here has got a solution .. Case 850C .. Case Motor A336BD .. Doing the top half of the motor with plans on reman injectors .. Problem is .. I cant get a reman .. Have called all over the country and my local Fuel Shop .. Part #is A156323 .. I...
  9. C

    looking for long reach

    as for the drowning .. yeah that would be a sh......y way to go .. didn't think about the valving but that does make sense .. good insight ..thanks What about extra counterweight .. any thoughts ?
  10. C

    looking for long reach

    Own a Case 9030B .. been a great machine The long reach boom will be primarily used for digging sand out or manure lagoons so not much side stress .. Why leave alone .. have you had bad experiences with long reach booms or only certain ones ?
  11. C

    looking for long reach

    Gentlemen .. am considering converting my Case Hoe to a long reach machine .. lots of big dairies around here with large manure lagoons that are filled with sand and need dredging .. any reasonably priced solutions out there ?
  12. C

    Case 9030B Problem

    Had the same problem this past week .. replaced the lift pump .. replaced the inline filter .. no go .. had to keep bleeding the injectors to get her to run .. pulled the brass elbow off of the sediment bowl and low and behold I find the fitting is plugged with leaves .. unplug it .. bleed the...
  13. C

    cx130 elec. problem on screen

    Was guessing on the cost .. retails for about $150 straight CX130 (not a B) part #A187584
  14. C

    cx130 elec. problem on screen

    same problem with my 9030b awhile back ..replaced bout everything ... even the computer ... turned out to be a bad RPM sensor .. do yourself a favor spend the $75 or whatever it is and replace it before torturing yourself and your wallet .. good luck and let me know
  15. C

    wiring help

    Wanna rewire my old Ford Louisville .. does anyone out there have a source for a wiring diagram for a 75 Louisville converted from a gasser to a 3208 Cat motor .... I know its a shot in the dark ...but hey ... doesnt hurt to ask right ?
  16. C

    Winter Service Question

    Nedly05 .. you were just up the road from me when you went to Tracy .. We dont get anywhere near the snow we used to get .. but cold .. we REALLY get cold .. or .. maybe Im just getting older As for pics .. the plan is to paint this winter .. bought all my stuff used .. bought big on...
  17. C

    Winter Service Question

    Ok .. all you iron heads out there .. looking for opinions .. have asked my mechanics and get conflicting stories .. so I post the question here .. Putting machinery up for winter hibernation .. better to change all oils and filters now or leave and change in the spring ??
  18. C

    Case Fuel Injector Pump Woes

    Not 100% certain .. depends on the type of pump .. I had a similar situation on my 850C .. linkage from the fuel shutoff going into the governor .. Our local Injection Pump Place said the bushing was probably shot and the shaft worn into the housing .. I replaced the O-ring and RTV'd it (make...
  19. C

    Territory protection policies

    "Protected Territories" .. a sensitive subject amongst dealers .. Cat and Deere Dealers both pay premiums to sell outside their area of responsibility .. this is manufacturer driven to protect dealers so that the dealer can preserve some profit margin .. after all that is why we are all in...
  20. C

    was do so many trash case equipment

    Lowboy .. no I dont know him .. I travel into VT frequently but normally go up 11 around the other side of the Adirondacks .. I will look him up next time Im out in that part of NY .. Thanks for the info
Top